LASER DEPOSITION OF CARBIDE-REINFORCED COATINGS

被引：50

作者：

CERRI, W ^{[1
]}

MARTINELLA, R ^{[1
]}

MOR, GP ^{[1
]}

BIANCHI, P ^{[1
]}

ANGELO, DD ^{[1
]}

机构：

[1] CRTN, ENEL, I-20100 MILAN, ITALY

来源：

SURFACE & COATINGS TECHNOLOGY | 1991年 / 49卷 / 1-3期

关键词：

D O I：

10.1016/0257-8972(91)90028-U

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

CO2 laser cladding with blown powder presents many advantages: fusion bonding with the substrate with low dilution, metallurgical continuity in the metallic matrix, high solidification rates, ease of automation, and reduced environmental contamination. In the present paper, laser cladding experimental results using families of carbides (tungsten and titanium) mixed with metallic alloys are reported. As substrates, low alloy construction steel (AISI 4140) (austenitic stainless steel) samples have been utilized, depending on the particular carbide reinforcement application. The coating layers obtained have been characterized by metallurgical examination. They show low dilution, absence of cracks, and high abrasion resistance. The WC samples, obtained with different carbide sizes and percentages, have been characterized with dry sand rubber wheel abrasion tests and the specimen behaviour has been compared with the behaviour of materials used for similar applications. The abrasion resistance proved to be better than that of other widely used hardfacing materials and the powder morphology have a non-negligible influence on the tribological properties.

引用

页码：40 / 45

页数：6