ONLINE MONITORING OF CUTTING-TOOL WEAR THROUGH TRIBO EMF ANALYSIS

被引：9

作者：

DONOVAN, A

SCOTT, W

机构：

[1] School of Mechanical and Manufacturing Engineering, Queensland University of Technology, QLD 4001

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 1995年 / 35卷 / 11期

关键词：

D O I：

10.1016/0890-6955(94)00107-U

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A novel approach to the problem of on-line identification of cutting tool wear in a turning operation has been carried out through analysis of the tribe electro motive force generated at the tool-workpiece interface. The a.c. component of the tribe emf, which results from the Fermi effect, is analysed in the spectral domain and variation between properties of the spectra and the deterioration of cemented carbide tool inserts is investigated. A high degree of correlation is found between progressive attenuation of higher frequency components of the power spectra and the development of tool flank wear under varying cutting conditions.

引用

页码：1523 / 1535

页数：13

共 12 条

[1]

Dan, Mathew, Tool wear and failure monitoring techniques for turning—A review, Int. J. Mach. Tools Manufact., 30, 4, pp. 579-598, (1990)

[2]

Lister, Barrow, Tool condition monitoring systems, Proc. 26th Int. M. T D. R. Conf, pp. 271-288, (1986)

[3]

Billett, Studies of cutting temperature control applied to a lathe spindle speed, Proc. 9th Int. M.TD.R. Conf., pp. 1273-1287, (1968)

[4]

Shillam, The on-line control of cutting conditions using direct feedback, Proc. 12th Int. MTDR Conf., pp. 15-22, (1971)

[5]

Kretinin, Et al., A system for measuring the wear of cutting tools in turning, Soviet Eng. Res., 4, 7, pp. 41-43, (1983)

[6]

Postnikov, Electro-physical and Electro-chemical Phenomena in Friction, Cutting and Lubrication, (1978)

[7]

Cook, Tool wear sensors, Wear, 62, 1, pp. 49-57, (1980)

[8]

Aoyama, Et al., Study on a throwaway tool equipped with a sensor to detect flank wear, Bull. Jap. Soc. Prec. Engng, 21, 3, pp. 203-208, (1987)

[9]

Koch, Experimental and theoretical analysis of lathe tool temperature in oblique cutting, Proc. 11th Int. M.T.D.R. Conf., pp. 533-540, (1970)

[10]

Turning Tools and Inserts, AB Sandvik, Coromant S-811, (1990)

← 1 2 →