CORROSION AND OXIDATION OF VANADIUM-BASE ALLOYS

被引：13

作者：

LOOMIS, BA

WIGGINS, G

机构：

[1] Argonne Natl Lab, Argonne, IL, USA, Argonne Natl Lab, Argonne, IL, USA

来源：

JOURNAL OF NUCLEAR MATERIALS | 1984年 / 122卷 / 1-3期

关键词：

2. MhTERIALS ANU PROCEDURE The materials for this investigationw ere unalloyed V; V-5 Tie V-IXr; V-15Cr-STi; Path A-PCA (nominal Fe-16Ni-13Cr-2 MO; Mn-0.5; Ti; Si composition) steel; and HT-9 (nominal Fe-lZCr-1 MO-0.5Ni; Mn; W-0.3V composition) steel.' Specimens of unalloyed V; V-5Ti and V-15Cr were prepared from V stock that contained -150 ppm oxygen. Rolled sheets of these materials were annealed for one hour at 1475 K in a vacuum of -lO'6Pa to produce a recrystallizeds tructure with an average grain diameter of nO02 cm. The V-l!Xr-5Ti alloy was obtained from the Fusion Materials Program Inventory (MFE Heat No. CAM 834-6) at Oak Ridge National Laboratory. Specimens of this material were also annealed #or one hour at 1475 K. The Path A-PCA and HT-9 materials were supplied by the Fusion Materials Program Inventory from MFE Heats No; K-280 and No. XAA-3587; respectively. The Path A-PCA material was aged for 8 hours at 1075 K in argon; 23%-cold worked; and aged for 2 hours at 1025 K in argon. The *Research supported by the Office of Fusion Energy of the U. S. Department of Energy. **PermanentA ddress: Boston University; Boston; Massachusetts0 2100 +The nominal c~positions of the materials are expressed in weight percent of solute;

D O I：

10.1016/0022-3115(84)90683-4

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

引用

页码：693 / 697

页数：5

共 8 条

[1]