DECOLOURIZATION OF DYE-CONTAINING SOLUTIONS BY ELECTROCOAGULATION

In the electrocoagulation of Drimarene Discharge X-3LG(R) (R12S) and Samaron Yellow 4(R) (D05H), the effects of sacrificial anodes, initial pH, rate of stirring and concentrations of dyes on the fraction of decolourization were tested. The experimental results revealed that the colour of dyes in the aqueous phase was effectively removed when iron and aluminium were used as sacrificial anodes and the concentration of the dyes was less than 100 p.p.m. When the concentration of R12S exceeded 300 p.p.m. iron was a more suitable sacrificial anode for electrocoagulation of R12S than aluminium. For the electrocoagulation of D05H in aqueous solution aluminium as a sacrificial anode was superior to iron when the concentration of D05H exceeded 300 p.p.m. Using iron as sacrificial anode, the residual concentration fraction of R12S was decreased below 10% when the initial concentration of R12S and charge passed were 500 p.p.m. and 120 C, respectively. The decolourization fraction of D05H was 99% when aluminium was used as sacrificial anode.