TRIPPING OF THIN-WALLED PLATING STIFFENERS IN AXIAL-COMPRESSION

被引：11

作者：

DANIELSON, DA

KIHL, DP

HODGES, DH

机构：

[1] Mathematics Department-Code 53Dd, Naval Postgraduate School, Monterey

[2] Ship Structures and Protection Department, David Taylor Research Center, Bethesda

[3] School of Aerospace Engineering, Georgia Institute of Technology, Atlanta

来源：

THIN-WALLED STRUCTURES | 1990年 / 10卷 / 02期

关键词：

D O I：

10.1016/0263-8231(90)90059-8

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The subject of this paper is the buckling behavior of thin-walled beams with an enforced axis of rotation subjected to longitudinal compressive loadings. The stiffeners are mathematically modeled by a refined nonlinear beam theory recently derived. An analytical solution is obtained to the beam buckling equations. This solution is expressed in terms of a simple formula which yields the tripping loads of T, angle, I, Z, and other open cross-sections. These predictions are shown to agree with those of other authors and with a finite element code. © 1990.

引用

页码：121 / 142

页数：22

共 24 条

[1]

Bleich, Buckling Strength of Metal Structures, (1952)

[2]

Argyris, Flexure-Torsion Failure of Panels, Aircraft Engineering and Aerospace Technology, pp. 174-219, (1954)

[3]

Kennard, Tripping of T-Shaped Stiffening Rings on Cylinders Under External Pressure, David Taylor Model Basin Report 1079, (1959)

[4]

Adamchak, Design equations for tripping of stiffeners under inplane and lateral loads, David W. Taylor Naval Ship Research and Development Center Report 79/064, (1979)

[5]

Adamchak, ULSTR: A program for estimating the collapse moment of a ship's hull under longitudinal bending, David W. Taylor Naval Ship Research and Development Center Report 82/076, (1982)

[6]

Van der Neut, Overall buckling of Z-stiffened panels in compression, Collapse: The Buckling of Structures in Theory and Practice, (1983)

[7]

Wittrick, General sinusoidal stiffness matrices for buckling and vibration analysis of thin flat-walled structures, Int. J. Mechanical Sci., 10, 2, pp. 949-966, (1968)

[8]

Smith, Bending, buckling, and vibrations of orthotropic plate-beam structures, J. Ship Res., 12, 5, pp. 249-268, (1968)

[9]

Smith, Compressive strength of welded ship grillages, Naval Construction Research Establishment report R611, (1975)

[10]

Bushnell, Computerized Buckling Analysis of Shells, (1985)

← 1 2 3 →