A FINITE-ELEMENT ANALYSIS OF DIRECT SHEAR TESTS ON STIFF CLAYS

被引:28
作者
CIVIDINI, A
GIODA, G
机构
[1] Department of Structural Engineering, Politecnico di Milano, Technical University of Milan, Milan, 20133
关键词
D O I
10.1002/nag.1610161203
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
A finite element analysis is presented of some direct shear tests carried out on samples of a stiff, heavily overconsolidated clay. The effects of softening are accounted for through a simple material model which views this phenomenon as a consequence of an intrinsic loss of strength of the material taking place when plastic strains increase. After illustrating the main characteristics of the finite element approach, with particular reference to the correct determination of the non-reversible strains, its use in the interpretation of the mentioned shear tests is discussed. Some comments are also presented on the mesh dependence of the numerical results, and on the use of a relation between material parameters and element size which reduces this negative effect. Finally, the solution procedure is applied to the simulation of a compression test in order to investigate the possibility of numerically detecting the 'spontaneous' (i.e. not directly induced by the boundary conditions) formation of shear zones within the specimen.
引用
收藏
页码:869 / 886
页数:18
相关论文
共 31 条
[1]  
Bathe KJ., 2006, FINITE ELEMENT PROCE
[2]   SHEAR STRENGTH CHARACTERISTICS OF JOINTED CLAY OF S BARBARA [J].
CALABRESI, G ;
MANFREDI.G .
GEOTECHNIQUE, 1973, 23 (02) :233-244
[3]  
CALABRESI G, 1990, 3 CICLO C MECC ING R
[4]  
CIVIDINI A, 1991, 2 CONVEGNO RIC GRUPP
[5]  
CIVIDINI A, 1988, 6TH P INT C NUM METH, P1043
[6]  
CIVIDINI A, 1989, 12TH P ICSMFE RIO JA, P1093
[7]   A FAST INCREMENTAL-ITERATIVE SOLUTION PROCEDURE THAT HANDLES SNAP-THROUGH [J].
CRISFIELD, MA .
COMPUTERS & STRUCTURES, 1981, 13 (1-3) :55-62
[10]   GEOMETRIC SOFTENING IN TRIAXIAL TESTS ON GRANULAR MATERIAL [J].
DRESCHER, A ;
VARDOULAKIS, I .
GEOTECHNIQUE, 1982, 32 (04) :291-303