SENSITIVITY DISTRIBUTION IN THE SYNTHESIS SOLUTION SPACE OF 4-BAR LINKAGES

被引：19

作者：

FAIK, S

ERDMAN, AG

机构：

[1] Ecole Mohammadia d’lngenieurs, Rabat

[2] Productivity Center, Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN

来源：

JOURNAL OF MECHANICAL DESIGN | 1991年 / 113卷 / 01期

关键词：

D O I：

10.1115/1.2912748

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper describes the sensitivity to tolerances of four-bar linkage link angles in terms of two nondimensional quantities sigma and tau. The traces of these quantities are then plotted in the (lambda(1), lambda(3), lambda(4)) space thus allowing the designer to synthesize a four-bar linkage with a prescribed sensitivity value and predict the tolerance required to achieve a certain accuracy on link angles.

引用

页码：3 / 9

页数：7

共 11 条

[1]

Knappe L.F., A Technique for Analyzing Mechanism Tolerances, Machine Design, pp. 155-157, (1963)

[2]

Garrett R.E., Hall A.S., Effect of Tolerance and Clearance in Linkage Design, ASME Journal of Engineering for Industry, pp. 198-202, (1969)

[3]

Sharfi O.M., Smith M.R., A Simple Method for the Allocation of Appropriate Tolerances and Clearances in Linkage Mechanisms, Mechanism and Machine Theory, 18, 2, pp. 123-129, (1983)

[4]

Baumgarten J.R., Van Der Werff K., A Probabilistic Study Relating to Tolerancing and Path Generation Error, Mechanism and Machine Theory, 20, 1, pp. 71-76, (1985)

[5]

Coit W.G., Riley D.R., Sensitivity Analysis of the Inverted Slider Crank Straight-Line Generator, Mechanism and Machine Theory, 4, 16, pp. 303-310

[6]

Hartenberg R.S., Denavit J., Kinematic Synthesis of Linkages, (1964)

[7]

Barker C.R., Complete Classification of Four Bar Linkages, Proceedings of the 8Th Applied Mechanisms Conference, (1983)

[8]

Barker C.R., Characteristic Surfaces in the Solution Space of Planar Four-Bar Mechanisms, Part 1: Definition of the Fundamental Families and Traces of the Surfaces for the Angles

[9]

Barker C.R., Characteristic Surfaces in the Solution Space of Planar Four-Bar Mechanisms, Part 2: Traces of the Surfaces for the Angles

[10]

Barker C.R., Characteristic Surfaces for Extreme Values of Angular Velocity Ratio in Planar Four-bar Mechanisms, Mechanism and Machine Theory, 22, 4, pp. 351-358, (1987)

← 1 2 →