PARTIAL VISIBILITY FOR SELECTING A PARTING DIRECTION IN MOLD AND DIE DESIGN

被引：33

作者：

CHEN, LL

CHOU, SY

WOO, TC

机构：

[1] National Taiwan Institute of Technology, Taipei

[2] University of Washington, Seattle, WA

来源：

JOURNAL OF MANUFACTURING SYSTEMS | 1995年 / 14卷 / 05期

关键词：

INJECTION MOLDING; DIE CASTING; GEOMETRIC MODELING; COMPUTER-AIDED DESIGN; COMPUTER-AIDED MANUFACTURING;

D O I：

10.1016/0278-6125(95)98869-8

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Selection of an optimal parting direction in mold and die design is considered. Based on the condition for demoldability, two levels of visibility-complete and partial-are defined for a surface. If a surface is completely visible along a certain direction, it can be separated from the mold along the opposite direction. If a surface is not completely visible and therefore cannot be separated from the mold along any direction, it can be decomposed into two portions: those that are separable and those that are undercuts; the former is based on complete visibility and the latter on partial visibility. Algorithms are given for computing the undercut volumes of a polyhedral surface with respect to a particular parting direction and for selecting a parting direction that minimizes the number of undercuts.

引用

页码：319 / 330

页数：12

共 27 条

[1]

Bralla, Handbook of Product Design for Manufacturing: A Practical Guide to Low-Cost Production, (1986)

[2]

Pye, Injection Mold Design: A Textbook for the Novice and a Design Manual for the Thermoplastics Industry, (1989)

[3]

Rubin, Handbook of Plastic Materials and Technology, (1990)

[4]

Campbell, Castings, (1991)

[5]

Kalpakjian, Manufacturing Processes for Engineering Materials, (1991)

[6]

Mochizuki, Yuhara, Methods of Extracting Potential Undercut and Determining Optimum Withdrawal Direction for Mold Designing, International Journal of the Japan Society of Precision Engineers, 26 v, 1 n, (1992)

[7]

Rosen, Dixon, Dong, Features and Algorithms for Tooling Cost Evaluation in Injection Molding and Die Casting, Proceedings of ASME Computers in Engineering Conference, (1992)

[8]

Ravi, Srinivasan, Decision Criteria for Computer-Aided Parting Surface Design, Computer Aided Design, 22 v, 1 n, pp. 11-18, (1990)

[9]

Shin, Lee, Design of Side Cores of Injection Mold from Automatic Detection of Interference Faces, Proceedings of the Symposium on Concurrent Engineering, pp. 27-41, (1992)

[10]

Smith, Lee, Computer-Aided Pattern Design for Casting Processes, AFS Transactions, pp. 21-28, (1986)

← 1 2 3 →