EFFECT OF FEMORAL ROTATION ON BONE-MINERAL DENSITY-MEASUREMENTS WITH DUAL-ENERGY X-RAY ABSORPTIOMETRY

Precision in femoral neck scans with dual energy X-ray absorptiometry (DXA) is affected by variability in positioning and subsequent repositioning of the femur for repeated scans. To study the in vitro effect of femoral rotation on the bone mineral density (BMD), four fresh-frozen cadaveric femurs were fixed in a specially designed jig which allows for rotation of the femurs. BMD measurements of the femurs were done in neutral position (0 degrees) i.e., with the femoral neck axis parallel to the surface of the couch and at 15 degrees, 30 degrees, and 45 degrees of internal and external rotation. In vivo precision of the femoral neck scan was determined in five normal male subjects. The scans were first done with the legs positioned using the manufacturer's foot block. Five scans were performed, with repositioning, on the left hip of each subject. The procedure was then repeated with the legs positioned using a custom-designed positioning jig to minimize the rotation of the hips during a scan. In the in vitro study, the femoral neck BMD value was minimum at neutral position (0 degrees) and increased when the femur was rotated internally or externally. In vivo precision error of the femoral neck scan was reduced by almost 50% with the use of the positioning jig when compared with the manufacturer's foot block. Femoral rotation was shown to have a significant effect on BMD measurements, and proper positioning of the femur during a scan can improve precision significantly.