POLYAMINE-MODIFIED UREA-FORMALDEHYDE-BONDED WOOD JOINTS .3. FRACTURE-TOUGHNESS AND CYCLIC STRESS AND HYDROLYSIS RESISTANCE

The objective of this study was to improve the durability and stability of urea-formaldehyde-bonded wood products by decreasing the internal stress developed during the resin cure and by improving the ability of the cured system to withstand cyclic stresses. Urea-formaldehyde resins were modified either by incorporating urea-capped di- and trifunctional amines into the resin structure or by using the hydrochloride derivatives of some of these amines as the curing agent, or by both methods. This study supplements our previous work by examining the effects of additional amines and subjecting bonded products to additional testing. Solid wood joints bonded with a variety (7 of 15) of modified adhesives had resistance to cyclic stress superior compared to that of joints bonded with unmodified urea-formaldehyde adhesive; at least three of the modified adhesives approached the behavior of phenol-formaldehyde-bonded joints. Resistance to moist heat aging, although still inferior to that of phenol-formaldehyde-bonded joints, was significantly improved for joints bonded with modified adhesives over joints made with unmodified resins. The fracture behavior of joints made with modified adhesives was different from that of joints made with unmodified resins. The fracture energy was greater for joints made with three of four modified adhesives than for joints made with unmodified resins. Modified adhesives produced particleboards with enhanced cyclic stress resistance. Formaldehyde emission from particleboards made with resins modified with urea-terminated amines was less than emission from boards made with unmodified resins. However, emissions from particleboards made with amine hydrochlorides were not improved compared to those from boards made with an ammonium chloride curing agent.