PREPARATION OF ZIRCONIA COATINGS BY HYDROLYSIS OF ZIRCONIUM ALKOXIDE WITH HYDROGEN-PEROXIDE

被引：30

作者：

SAKURAI, C ^{[1
]}

FUKUI, T ^{[1
]}

OKUYAMA, M ^{[1
]}

机构：

[1] COLLOID RES INST,KITAKYUSHU 805,JAPAN

来源：

JOURNAL OF THE AMERICAN CERAMIC SOCIETY | 1993年 / 76卷 / 04期

关键词：

D O I：

10.1111/j.1151-2916.1993.tb05337.x

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Coatings of 8.8-mol%-yttria-doped zirconia were fabricated using a transparent and spinnable sol prepared by hydrolysis of zirconium alkoxide with hydrogen peroxide and nitric acid. The sol gave a crack-free coating film consisting of fine grains. The crystalline phase was cubic after heating at 1000-degrees and 1200-degrees-C and cubic and tetragonal at 1350-degrees-C, with the coating being highly oriented in the (111) plane, especially at 1000-degrees-C. Activation energy of the coating films was higher than that of the bulk. Transmittance through a film thickness of about 0.3 mum on each side was 75%.

引用

页码：1061 / 1064

页数：4

共 15 条

[1] MORPHOLOGY OF ELECTROCHEMICAL VAPOR-DEPOSITED YTTRIA-STABILIZED ZIRCONIA THIN-FILMS [J].