FRICTION AND WEAR PROPERTIES OF POLYMERIC COMPOSITE-MATERIALS FOR BEARING APPLICATIONS

被引:123
作者
ELSAYED, AA [1 ]
ELSHERBINY, MG [1 ]
ABOELEZZ, AS [1 ]
AGGAG, GA [1 ]
机构
[1] CAIRO UNIV,FAC ENGN,DEPT MECH DESIGN & PROD,CAIRO,EGYPT
关键词
FRICTION AND WEAR; TRIBOLOGICAL PROPERTIES; POLYMERIC COMPOSITES; BEARING APPLICATIONS;
D O I
10.1016/0043-1648(94)06546-2
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This paper presents a study of the tribological properties of two locally developed polymeric composite materials for bearing applications. Unidirectional reinforcements by linen and jute fibres are used, each in turn, in unsaturated polyester resin. Friction and wear tests are carried out, in dry conditions, on a pin-on-disc machine. The experimental results, backed by scanning electron microscope examination, revealed that the reinforcement volume fraction as well as orientation have considerable effect on the friction and wear of polyester composites. An increase of fibre volume fraction to 33% increased the coefficient of friction of the tested material by about 14% and decreased its wear rate by about 95% at both low and high values of pressure-velocity product (PV limit) when the fibres were oriented normal to the specimen surface. The same increase in volume fraction of the fibres when oriented in the longitudinal and transverse directions resulted in almost the same increase in the coefficient of friction (16%) while the wear rate decreased only by 65% at low PV value. For the same orientations at high PV value, the results showed no significant effect on the coefficient of friction while the wear rate decreased by 72%.
引用
收藏
页码:45 / 53
页数:9
相关论文
共 23 条
[1]  
ABDELAZIZ MT, 1982, THESIS CAIRO U EGYPT
[2]  
AGGAG GA, 1993, THESIS CAIRO U EGYPT
[3]  
AMIN GM, 1983, THESIS CAIRO U
[4]  
ARKLES B, 1974, ADV POLYM FRICTION B, V5, P663
[5]   THE FRICTION AND WEAR OF POLY(TETRAFLUOROETHYLENE)-POLY(ETHERETHERKETONE) COMPOSITES - AN INITIAL APPRAISAL OF THE OPTIMUM COMPOSITION [J].
BRISCOE, BJ ;
YAO, LH ;
STOLARSKI, TA .
WEAR, 1986, 108 (04) :357-374
[6]  
BRISCOE BJ, 1980, FUNDAMENTALS TRIBOLO, P733
[7]   THE EFFECT OF FIBER ORIENTATION ON THE ABRASIVE WEAR BEHAVIOR OF POLYMER COMPOSITE-MATERIALS [J].
CIRINO, M ;
FRIEDRICH, K ;
PIPES, RB .
WEAR, 1988, 121 (02) :127-141
[8]   THE EFFECT OF UNIDIRECTIONAL COTTON FIBER REINFORCEMENT ON THE FRICTION AND WEAR CHARACTERISTICS OF POLYESTER [J].
ELEICHE, AM ;
AMIN, GM .
WEAR, 1986, 112 (01) :67-78
[9]  
ELSAYED AA, 1993, FCTML393 NAT I STAND
[10]  
KSUKIZOE T, 1977, J LUBR TECHNOL, V99, P401