REACTIVITY OF AL-2.5 PCT LI ALLOY WITH WATER AS STUDIED BY THE EXPLODING WIRE TECHNIQUE

The reaction of molten Al-2. 5 pct Li alloy or pure aluminum with water was studied by the exploding wire technique incorporating a crowbar switch current interruptor and an inductive energy store. The extent of chemical reaction was measured by the amount of hydrogen gas product vs the electrical energy input to the alloy or Al wire placed in water. The minimum electrical energy required to trigger the chemical reaction of the molten alloy or Al with water was about 2 kJ per gram of the metal. A further increase in the energy input to the wire revealed a large difference in the degree of chemical conversion between the two metals; the alloy wire needed only 4 kJ/g of the energy to achieve more than 90 pct of chemical conversion, whereas pure aluminum wire to achieve the same degree of the conversion needed 10 kJ/g to vaporize most of the wire mass.