PREDICTION OF FILM CONDENSATION ON HORIZONTAL INTEGRAL FIN TUBES

被引：59

作者：

ADAMEK, T ^{[1
]}

WEBB, RL ^{[1
]}

机构：

[1] PENN STATE UNIV,DEPT MECH ENGN,UNIVERSITY PK,PA 16802

来源：

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 1990年 / 33卷 / 08期

关键词：

D O I：

10.1016/0017-9310(90)90027-R

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This paper presents an analytical model for prediction of film condensation on horizontal integral fin tubes. The present model accounts for condensation on all surfaces in the flooded and unflooded regions, and includes the effect of fin efficiency. However, it is based on quite simple principles, and is applicable to hand or computer calculations. The model is applicable to fins of two different basic profile shapes: the special continuous profile shapes previously described by Gregorig, Adamek, or Webb, or fins having rectangular or trapezoidal cross-sections. The model is validated by showing its ability to predict a wide range of experimental data. The data include water, methanol, n-pentane, R-ll, R-12, R-22 and R-113. These data for 80 different tube geometries are predicted within ± 15%. Predictions by the present model are compared with models previously proposed by Webb et al., Honda and Nozu, and Beatty and Katz. © 1990.

引用

页码：1721 / 1735

页数：15

共 27 条

[1] ANALYTICAL MODEL OF FILM CONDENSATION ON INTEGRAL-FIN TUBES [J].

ADAMEK, T .

WARME UND STOFFUBERTRAGUNG-THERMO AND FLUID DYNAMICS, 1985, 19 (02) :145-157

[2] PREDICTION OF FILM CONDENSATION ON VERTICAL FINNED PLATES AND TUBES - A MODEL FOR THE DRAINAGE CHANNEL [J].

ADAMEK, T ;

WEBB, RL .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1990, 33 (08) :1737-1749

[3]

ADAMEK T, 1981, WARME STOFFUBERTRAG, V15, P25

[4]

BEATTY KO, 1948, CHEM ENG PROG, V44, P55

[5]

Gregorig R., 1954, Z ANGEW MATH PHYS, V5, P36, DOI DOI 10.1007/BF01600263

[6]

HENRICI K, 1961, THESIS TU KARLSRUHE

[7]

HONDA H, 1983, P ASME JSME THERMAL, V3, P289

[8]

HONDA H, 1987, HEAT TRANSFER SCI TE, P455

[9]

HONDA H, 1987, ASME JSME THERMAL EN, V4, P385

[10]

HONDA H, 1984, FUNDAMENTALS PHASE C, V38, P107

← 1 2 3 →