PLANE-STRAIN STRESS DISTRIBUTIONS IN DISCRETE AND BLENDED COATED SOLIDS UNDER NORMAL AND SLIDING CONTACT

被引：27

作者：

ANDERSON, IA ^{[1
]}

COLLINS, IF ^{[1
]}

机构：

[1] UNIV AUCKLAND, SCH ENGN, AUCKLAND, NEW ZEALAND

来源：

WEAR | 1995年 / 185卷 / 1-2期

关键词：

CONTACT MECHANICS; FINITE ELEMENT MODELING; SHAKEDOWN; SURFACE COATINGS; LAYERED SYSTEMS; WEAR RESISTANCE;

D O I：

10.1016/0043-1648(94)06587-X

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Improvement of the wear properties of engineering components can be achieved by the application of surface coatings. In this paper, properties of the stress fields induced in such composite bodies by the application of normal and frictional loading distributions under plane strain conditions are studied. Attention is concentrated on those aspects of the stress fields which control the development of surface cracks, delamination and the long term behaviour of such surfaces (shakedown). The effect of using blended coatings instead of single uniform coatings is studied.

引用

页码：23 / 33

页数：11

共 21 条

[1]

Komvopoulos, Saka, Suh, The role of hard layers in lubricated and dry sliding, Journal of Tribology, 109, pp. 223-231, (1987)

[2]

Sneddon, Fourier Transforms, (1951)

[3]

Conway, Vogel, Farnham, So, Normal and shearing contact stresses in indented strips and slabs, Int. J. Eng. Sci., 4, pp. 343-359, (1966)

[4]

Meijers, The contact problem of a rigid cylinder on an elastic layer, Appl. Sci. Res., 18, pp. 353-383, (1968)

[5]

Gupta, Walowit, Contact stresses between an elastic cylinder and a layered elastic solid, J. Lubr. Technol., 96, 2, pp. 250-257, (1974)

[6]

Gupta, Walowit, Finkin, Stress distributions in plane strain layered elastic solids subjected to arbitrary boundary loading, Journal of Lubrication Technology, 95, 4, pp. 427-433, (1973)

[7]

King, O'Sullivan, Sliding contact stresses in a two-dimensional layered elastic half-space, Int. J. Solids Struct., 23, 5, pp. 581-597, (1987)

[8]

Komvopoulos, Finite element analysis of a layered elastic solid in normal contact with a rigid surface, Trans. ASME J. Tribol., 110, pp. 477-485, (1988)

[9]

Chen, Engel, Impact and contact stress analysis in multilayer media, Int. J. Solids Struct., 8, pp. 1257-1281, (1972)

[10]

Matthewson, Axi-symmetric contact on thin compliant coatings, J. Mech. Phys. Solids, 29, 2, pp. 89-113, (1981)

← 1 2 3 →