TIO2 PHOTOCATALYSIS FOR INDOOR AIR APPLICATIONS - EFFECTS OF HUMIDITY AND TRACE CONTAMINANT LEVELS ON THE OXIDATION RATES OF FORMALDEHYDE, TOLUENE, AND 1,3-BUTADIENE

Persistent indoor air contaminants, those originating from emissions by interior furnishings, occupants, and materials of construction, typically exist in concentrations below 100 parts per billion (ppb) on an individual basis. The total of distinct contaminants may number in the hundreds with an equivalent accumulated concentration of one part per million. This study investigated the effects of humidity and trace (sub-ppmv) contaminant levels on the oxidation rates of formaldehyde, toluene, and 1,3-butadiene. The evaluation also included variations in UV intensity and flow residence time. UV intensities from inexpensive mercury fluorescent lamps, those which are expected to be employed in a practical photocatalytic purifier, are in the mW/cm(2) range. For this reason, the study included UV intensities in that range. The reactor element used in the study was a low pressure drop alumina reticulate, wash-coated with Degussa P25 titania. The data indicated that the reaction was first-order for the three reactants at the sub-ppmv level. An important finding was that competitive adsorption between water and trace (sub-ppmv) contaminants has a significant effect on the oxidation rate. The dependencies of humidity and contaminant concentrations on the oxidation rates are explained as being the results of competitive adsorption on available hydroxyl adsorption sites and of changes in hydroxyl radical population levels.