PROCESSES RELATED TO DRYING .2. USE OF THE SAME MODEL TO SOLVE TRANSFERS BOTH IN SATURATED AND UNSATURATED POROUS-MEDIA

被引：46

作者：

PERRE, P

MOYNE, C

机构：

[1] ENGREF, 54042, Nancy Cedex

[2] LEMTA, URA CNRS 875, 2 Av de la Forêt de Haye, 54516, Vandoeuvre Cedex

来源：

DRYING TECHNOLOGY | 1991年 / 9卷 / 05期

关键词：

2D-Simulations; capillary porous media; gaseous pressure;

D O I：

10.1080/07373939108916747

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

From the mathematical formulation presented in part I, a numerical code is developed to simulate heat and mass transfers in porous media. The aim of this tool is to understand and to improve each process related to drying. The association of a comprehensive set of equations with a efficient 2-D computer code allows us to predict the comportment of several porous media even if submitted to severe drying conditions. A few runs have been selected with special attention paid to the effect of internal gaseous pressure: Convective drying of softwood at high temperature illustrate the typical two-dimensional transfers that occur in an anisotropic medium. Microwave drying of light concrete pinpoints liquid expulsion of water which is driven by the pressure due to internal heating. Finally, appropriate physical behaviours of a bed of glass spheres allows one to deal with simple processes for which full saturation occurs.

引用

页码：1153 / 1179

页数：27

共 21 条

[1]

Whitaker S., Simultaneous heat, mass ans momentum transfer in porous media: a theory of drying, Advances in Heat Transfer, 13, pp. 119-203, (1977)

[2]

Spolek G.A., Plumb O.A., A numerical model of heat and mass transport in wood during drying, Drying′80, 2, pp. 84-92, (1980)

[3]

Felix S., Razafinddrakoto J.C., Castera P., Modeling of hygrothermoelastic effects during timber drying, Proc. of IUFRO Int. Wood Drying Symposium, pp. 238-246, (1989)

[4]

Quintard M., Puiggali J.R., Numerical modelling of transport processes during the drying of a granular porous medium, Heat and Technology, 4, 2, pp. 37-57, (1986)

[5]

Stanish M.A., Schajer S., Kayihan F., A mathematical model of drying for hygroscopic porous media, AIChE Journal, 32, 8, pp. 1301-1311, (1986)

[6]

Plumb O.A., Couey L.M., Shearer D., Contact drying of wood veneer, Drying Technology, 4, 3, pp. 387-413, (1986)

[7]

Moyne C., Degiovanni A., Importance of the gas phase momentum equation in drying above the boiling point of water, Proc. 4th Int. Drying Symp., pp. 119-125, (1984)

[8]

Perre P., Fohr J.P., Arnaud G., A model of drying applied to softwoods: the effect of gazeous pressure below the boiling point, DRYING′89, pp. 91-98, (1989)

[9]

Basilico C., Martin M., Approche experimentale des mecanismes de transfert au cours du sechage convectif a haute temperature d′un bois resineux, Int. J. Heat Mass Transfer, 27, 5, pp. 657-668, (1984)

[10]

Moyne C., Transferts couplės chaleur-masse lors du sechage: prise en compte du mouvement de la phase gazeuse, These d'Etat Nancy, (1987)

← 1 2 3 →