EFFECT OF SPECIMEN GEOMETRY ON FATIGUE CRACK-GROWTH IN PLANE-STRAIN .2. OVERLOAD RESPONSE

被引：38

作者：

SHERCLIFF, HR

FLECK, NA

机构：

[1] Cambridge University Engineering Department, Cambridge, CB2 1PZ, Trumpington Street

来源：

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES | 1990年 / 13卷 / 03期

关键词：

D O I：

10.1111/j.1460-2695.1990.tb00601.x

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Abstract— Overload tests were performed on compact tension (CT) and centre cracked panel (CCP) specimens made from 6082‐T6 aluminium alloy and BS4360 50B structural steel. The specimens were sufficiently thick for plane strain conditions to apply. Consistently greater retardation was observed in the CCP geometry than in the CT geometry. The effect of geometry is understood in terms of the T‐stress and its effect on the overload plastic zone size. This was confirmed by biaxial tests in which the T‐stress was varied independently of K. The action of machining off the side faces of an overloaded specimen did not eliminate the retardation; thus overload retardation is not due to a propping open by the surface regions of the specimen. Discontinuous closure was observed after overloads in the aluminium alloy and steel, as predicted by finite element calculations. Copyright © 1990, Wiley Blackwell. All rights reserved

引用

页码：297 / 310

页数：14

共 16 条

[11]

Turner C.C., Carman C.D., Hillberry B.M., Fatigue crack closure behaviour at high stress ratios, Mechanics of Fatigue Crack Closure, pp. 528-535, (1988)

[12]

Newman J.C., Elber W., Summary, Mechanics of Fatigue Crack Closure, (1988)

[13]

Tan P.W., Raju I.S., Newman J.C., Boundary force method for analysing two‐dimensional cracked bodies, (1986)

[14]

Stouffer D.C., Williams J.F., A model for fatigue crack growth with a variable stress intensity factor, Engng Fract. Mech., 11, pp. 525-536, (1979)

[15]

Rice J.R., Stress due to a sharp notch in a work hardening elastic‐plastic material loaded in longitudinal shear, Journal of Applied Mechanics, 34, pp. 287-298, (1967)

[16]

Allison J.E., Measurement of crack tip stress distributions by X‐ray diffraction, Fracture Mechanics, pp. 550-562, (1979)

← 1 2 →