EXPERIMENTAL-MEASUREMENT OF FLUID-FLOW THROUGH THE GRINDING ZONE

被引：68

作者：

ENGINEER, F

GUO, C

MALKIN, S

机构：

[1] Department of Mechanical Engineering, University of Massachusetts, Amherst, MA

[2] Norton Company, Worcester, MA

来源：

JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME | 1992年 / 114卷 / 01期

关键词：

D O I：

10.1115/1.2899759

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

An experimental test rig was developed to measure the amount of grinding fluid which flows through the grinding zone in straight plunge grinding. Proportional relationships were generally obtained between the flow rate from the nozzle and the useful flow rate of fluid passing through the grinding zone. The percentage of applied fluid passing through the grinding zone was found to depend mainly on the bulk porosity of the grinding wheel and the nozzle position. Wheel dressing has only a secondary influence, which is attributed to its influence on the surface porosity of the wheel. The workspeed and wheel depth of cut have virtually no influence.

引用

页码：61 / 66

页数：6

共 5 条

[1]

Malkin S., Grinding Technology: Theory and Application of Machining with Abrasives, (1989)

[2]

Akiyama T., Shibata J., Yonetsu S., Behavior of Grinding Fluid in the Gap of the Contact Area between a Grinding Wheel and a Workpiece, Proceedings of the 5Th International Conference on Production Engineering, pp. 55-57, (1984)

[3]

Powell J., The Application of Grinding Fluid in Creep Feed Grinding, (1979)

[4]

Schumack M.R., Chung J.B., Schultz W.W., Kannatey-Asibu E., Analysis of Fluid Flow Under a Grinding Wheel, ASME Journal of Engineering for Industry, 113, pp. 190-197, (1991)

[5]

Lavine A., Malkin S., The Role of Cooling in Creep Feed Grinding, Int. J. Adv. Manuf Technology, 5, pp. 97-111, (1990)

← 1 →