PREPARATION, SINTERING, MICROSTRUCTURE, AND THERMAL-STABILITY OF Y2O3-DOPED AND CEO2-DOPED TETRAGONAL ZIRCONIA CERAMICS

被引:19
作者
HIRANO, M
INADA, H
机构
[1] Noritake Co., Limited, Nishi-ku, Nagoya-shi, Noritake
关键词
D O I
10.1016/0272-8842(91)90034-W
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Yttria- and ceria-doped tetragonal zirconia polycrystals ((Y, Ce)-TZP) with compositions 2.5 mol% YO1.5-4 mol% CeO2-ZrO2, 4 mol% YO1.5-4 mol% CeO2-ZrO2, and 2.5 mol% YO1.5-5.5 mol% CeO2-ZrO2 were prepared from zirconia sols obtained by hydrolysis of ZrOCl2 solution, and their sintering, microstructure and thermal stability were studied. Sintered bodies with 99% TD were obtained by firing at 1400-degrees-C for 2 h in air. The grain size of (Y, Ce)-TZP increased with decreasing Y2O3 content in Y2O3-CeO2-ZrO2. (Y, Ce)-TZP was resistant to tetragonal-to-monoclinic (t --> m) phase transformation during low temperature ageing as compared with 3Y-TZP.
引用
收藏
页码:359 / 365
页数:7
相关论文
共 15 条
[1]  
Gupta, Bechtold, Kuznicki, Cadoff, Rossing, Stabilization of tetragonal phase in polycrystalline zirconia, J. Mater. Sci., 12, pp. 2421-2426, (1977)
[2]  
Gupta, Lange, Bechtold, Effect of stress-induced phase transformation on the properties of polycrystalline zirconia containing metastable tetragonal phase, J. Mater. Sci., 13, pp. 1464-1470, (1978)
[3]  
Lange, Transformation toughning, Part 3: Experimental observation in ZrO<sub>2</sub>Y<sub>2</sub>O<sub>3</sub> system, J. Mater. Sci., 17, pp. 240-246, (1982)
[4]  
Tsukuma, Kubota, Nobugai, Thermal and mechanical properties of Y<sub>2</sub>O<sub>3</sub>-partially stabilized zirconia, Yogyo-Kyokai-Shi (J. Jpn Ceram. Soc.), 92, 5, pp. 233-241, (1984)
[5]  
Rieth, Reed, Naumann, Fabrication and flexural strength of ultrafine-grained yttria-stabilized zirconia, Am. Ceram. Soc. Bull., 55, 8, pp. 717-721, (1976)
[6]  
Rieth, Reed, Naumann, Fabrication and flexural strength of ultrafine-grained yttria-stabilized zirconia, Am. Ceram. Soc. Bull., 55, 8, (1976)
[7]  
Kobayashi, Kuwajima, Masaki, Phase change and mechanical properties of ZrO<sub>2</sub>Y<sub>2</sub>O<sub>3</sub> solid electrolyte after aging, Solid State Ionics, 3-4, pp. 489-493, (1981)
[8]  
Sato, Shimada, Crystalline phase change in yttria-partially-stabilized zirconia by low-temperature annealing, Journal of the American Ceramic Society, 67, 10, pp. c212-c213, (1984)
[9]  
Tsukuma, Mechanical properties and thermal stability of CeO<sub>2</sub> containing tetragonal zirconia polycrystals, Am. Ceram. Soc. Bull., 65, 10, pp. 1386-1389, (1986)
[10]  
Urabe, Udagawa, Ikawa, TEM observation for microstructure-control in ceramics, J. Electron. Microsc., 20, 3, pp. 154-160, (1986)