THE LOESS OF NORTH-CENTRAL CHINA - GEOTECHNICAL PROPERTIES AND THEIR RELATION TO SLOPE STABILITY

被引:126
作者
DIJKSTRA, TA
ROGERS, CDF
SMALLEY, IJ
DERBYSHIRE, E
JIN, LY
MIN, MX
机构
[1] Department of Physical Geography, University of Utrecht, 3508 TC Utrecht
[2] Centre for Loess Research, Department of Civil Engineering, Loughborough University of Technology, Loughborough
[3] Department of Geography, Royal Holloway and Bedford New College, Egham
[4] Geological Hazards Researh Institute, Gansu Academy of Sciences, Lanzhou
关键词
D O I
10.1016/0013-7952(94)90001-9
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
Loess is an aeolian deposit consisting of predominantly silt-sized quartz particles, and containing variable amounts of clay-sized minerals. Loess is generally classified as a water-softening material, because upon wetting the loess fabric rapidly weakens or collapses. The strain hardening of Malan loess and the brittle failure of Lishi and Wucheng loess are in strong contrast to the failure behaviour of these loess deposits in a remoulded state. From tests carried out on samples with varying moisture contents, using a modified Bromhead ring shear apparatus, it was found that the effective apparent cohesion gradually increases and the effective internal friction angle decreases with an increase in moisture content. When the moisture content reaches a material-specific threshold, the effective cohesion decreases rapidly and the effective internal friction angle stabilises at a residual value. The frequent failure of loess slopes in the western part of the Chinese Loess Plateau is closely related to progressive weathering along zones in these slopes, which causes a dramatic decrease in strength from the peak strength condition. Progressive weathering is common in the loess slopes in the western part of the Chinese Loess Plateau. During the process shear strength reduction along potential slip surfaces may be achieved by leaching of readily soluble salts, destruction of cementation bonds, and redistribution of particles. Localized collapse of the loess fabric causes internal deformation and consequently peak strength conditions are concentrated on a progressively smaller area of the failure plane. Therefore, the mode of failure of loess slopes is generally determined by brittle failure of the undisturbed, and unweathered, central parts of the slopes. It is important that both the weathered and unweathered strength of the loess materials in this area be established in order to analyze the stability of existing loess slopes, many of which are steep and lie directly above domestic and industrial urban areas.
引用
收藏
页码:153 / 171
页数:19
相关论文
共 49 条
[1]  
Anayi, Boyce, Rogers, Modified Bromhead ringshear apparatus, ASTM Geotech. Testing J., 12, 2, (1989)
[2]  
Anayi, Boyce, Rogers, Comparison of alternative methods of measuring the residual strength of a clay, Transportation Research Record, 1192, pp. 16-26, (1990)
[3]  
Billard, Muxart, Derbyshire, Wang, Dijkstra, Landsliding and land use in the loess of Gansu Province, China, Z. Geomorphol., pp. 117-131, (1993)
[4]  
Boyce, Anayi, Rogers, Residual strength of soils at low normal stresses, Landslides. Proc. 5th Int. Syrup. Landslides, Lausanne, Switzerland, 1, pp. 85-88, (1988)
[5]  
Bromhead, A simple ring shear apparatus, Ground Eng., 15, 5, pp. 40-44, (1979)
[6]  
Cabrera, Smalley, Quickclays as products of glacial action: a new approach to their nature, geology, distribution and geotechnical properties, Eng. Geol., 7, pp. 115-133, (1973)
[7]  
Campbell, Types of erosion prevalent in New Zealand, Assoc. Int. Hydrol. Sci., Assemblee Generale de Bruxelles, 2, pp. 82-95, (1951)
[8]  
Clevenger, Experiences with loess as a foundation material, Proc. ASCE, Soil Mech. Eng. Div. SM3, 1025, pp. 1-26, (1956)
[9]  
Close, Mccormick, Where the mountains walked. An account of the recent earthquake in Kansu Province, China, which destroyed 100,000 lives, Natl. Geogr. Mag., 41, 5, pp. 445-464, (1922)
[10]  
Crozier, Techniques for the morphometrical analysis of landslips, Z. Geomorphol., 17, 1, pp. 78-101, (1973)