INFRARED RADIOMETRY MEASUREMENTS USING PLASTIC HOLLOW WAVE-GUIDES BASED ON THIN-FILMS

被引:7
作者
ALALUF, M [1 ]
DROR, J [1 ]
KATZIR, A [1 ]
CROITORU, N [1 ]
机构
[1] TEL AVIV UNIV,FAC ENGN,DEPT ELECT ENGN PHYS ELECTR,IL-69978 TEL AVIV,ISRAEL
关键词
D O I
10.1088/0022-3727/26/7/004
中图分类号
O59 [应用物理学];
学科分类号
摘要
Plastic hollow waveguides were used for non-contacting temperature measurements. Employing these fibres, we performed temperature measurements between room temperature and 120-degrees-C, achieving good agreement with theoretically expected values. The temperature and spatial resolutions of the waveguides were measured. The temperature resolution was found to be 0.08-degrees-C (fibre dimensions: internal diameter 2.4 mm, length 60 cm) and the spatial resolution was approximately equal to the inner diameter (ID) of the waveguide. The curvature loss of the waveguide increased with decreasing radii of curvature. It was also shown that waveguides with dielectric layer thicknesses of 0.2-0.6 mum are suitable for radiometry at this temperature range.
引用
收藏
页码:1036 / 1040
页数:5
相关论文
共 12 条
[1]   PLASTIC HOLLOW FIBERS AS A SELECTIVE INFRARED RADIATION TRANSMITTING MEDIUM [J].
ALALUF, M ;
DROR, J ;
DAHAN, R ;
CROITORU, N .
JOURNAL OF APPLIED PHYSICS, 1992, 72 (09) :3878-3883
[2]  
Croitoru N., 1988, Proceedings of the SPIE - The International Society for Optical Engineering, V906, P191, DOI 10.1117/12.945276
[3]   CHARACTERIZATION OF HOLLOW FIBERS FOR THE TRANSMISSION OF INFRARED RADIATION [J].
CROITORU, N ;
DROR, J ;
GANNOT, I .
APPLIED OPTICS, 1990, 29 (12) :1805-1809
[4]  
CROITORU N, 1990, Patent No. 4930863
[5]  
DAHAM R, 1991, P SOC PHOTOOPT INSTR, V1591
[6]  
HEAVENS OS, 1964, PHYS THIN FILMS, V2, P193
[7]  
HOBROCK LM, 1982, P SOC PHOTO-OPT INST, V320, P140, DOI 10.1117/12.933195
[8]   LOSS CHARACTERISTICS OF CIRCULAR HOLLOW WAVE-GUIDES FOR INCOHERENT INFRARED LIGHT [J].
MATSUURA, Y ;
SAITO, M ;
MIYAGI, M ;
HONGO, A .
JOURNAL OF THE OPTICAL SOCIETY OF AMERICA A-OPTICS IMAGE SCIENCE AND VISION, 1989, 6 (03) :423-427
[9]  
SHIMIZU M, 1983, 3RD P SENS S TSUK, P275
[10]  
Ueda T., 1982, Journal of the Japan Society of Precision Engineering, V48, P629