MEASUREMENT OF CARDIAC-OUTPUT - TRANSTRACHEAL DOPPLER VERSUS THERMODILUTION

The ABCOM 1 transtracheal Doppler (TTD) has been developed as a non-invasive cardiac output monitor. With this device, cardiac output is continuously calculated from ascending aortic blood flow velocity and aortic diameter obtained via an ultrasound transducer incorporated into the tip of an endotracheal tube. We evaluated the clinical use of the ABCOM 1 monitor and compared cardiac outputs obtained using the TTD system with simultaneous thermodilution (TD) measurements. We found the operation of the ABCOM 1 monitor to be difficult and time-consuming. In our operating rooms, acceptable Doppler signal quality was difficult to obtain. There was no correlation between 36 simultaneously obtained TTD and TD cardiac output measurements. The average difference between measurement techniques and the limits of agreement were unacceptably large (mean difference = 3.04 L . min-1, mean +/- 2 SD = -6.04 to 12.48 L . min-1). Separately analyzing only those measurements during which Doppler signal quality was adequate did not improve agreement between TTD and TD measurements. On the basis of these findings, TTD cannot be recommended as a clinical cardiac output measurement technique.