STEADY-STATE SIMULATION OF VAPOR-COMPRESSION HEAT-PUMPS

被引：24

作者：

HERBAS, TB

BERLINCK, EC

URIU, CAT

MARQUES, RP

PARISE, JAR

机构：

[1] Mechanical Engineering Department, Pontificia Universidade Católica do Rio de Janeiro, Rio de Janeiro

来源：

INTERNATIONAL JOURNAL OF ENERGY RESEARCH | 1993年 / 17卷 / 09期

关键词：

HEAT PUMP; SIMULATION; R-134A;

D O I：

10.1002/er.4440170903

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

A vapour compression simulation model was developed. Simple mathematical models were employed for each component of the cycle. They resulted in a set of nonlinear equations, which was solved numerically. Heat losses from condenser to ambient were included. The model is capable of predicting the operating point of the system (including condensing and evaporating pressures) as a function of equipment characteristics (for example, compressor swept volume, speed and clearance ratio, and heat exchanger overall conductances) and prevailing thermodynamic conditions (such as heat source and heat sink temperatures with the mass flow rates of their fluids). The predicted performance was compared to that of an existing R-12 unit, showing good agreement. As an application, a comparative analysis is made on the thermodynamic performance of a domestic heat pump running on two different refrigerants: R-12 and R-134a.

引用

页码：801 / 816

页数：16

共 56 条

[1] Almeida M.S.V., Gouveia M.C., Zdebsky S.R., Parise J.A.R., Performance analysis of a heat pump assisted drying system, International Journal of Energy Research, 14, pp. 397-406, (1990)
[2] Bansal P.K., Dutto T., Hivet B., Performance evaluation of environmentally benign refrigerants in heat pumps. 1: A simulation study, International Journal of Refrigeration, 15, 6, pp. 340-348, (1992)
[3] Bare J.C., Gage C.L., Radermacher R., Jung D., Simulation of nonazeotropic refrigerant mixtures for use in a dual‐circuit refrigerator/freezer with countercurrent heat exchangers, ASHRAE Transactions, 97, pp. 447-454, (1991)
[4] Beermann K., Kruse H., Experiences with the refrigerant R‐134a as a drop‐in replacement in a large water‐water heat pump, Proceedings of the 1992 International Refrigeration Conference — Energy Efficiency and New Refrigerants, 14–17 July 1992, 1, pp. 211-219, (1992)
[5] Blundell C.J., Optimising heat exchangers for air‐to‐air space heating heat pumps in the United Kingdom, International Journal of Energy Research, 1, pp. 69-94, (1977)
[6] Bong T.Y., Hawlader M.N.A., Mahmood W., Influence of expansion device on the performance of an air‐conditioner with a desuperheater, ASHRAE Transactions, 94, pp. 661-672, (1988)
[7] Crown S.W., Shapiro H.N., Pate M.B., A comparison study of the thermal performance of R12 and R134a, Proceedings of the 1992 International Refrigeration Conference—Energy Efficiency and New Refrigerants, 14–17 July 1992, 1, pp. 187-196, (1992)
[8] Cecchini C., Marchal D., A simulation model of refrigerating and air‐conditioning equipment based on experimental data, ASHRAE Transactions, 97, pp. 388-393, (1992)
[9] Dabiri A.E., A steady state computer simulation model for air‐to‐air heat pumps, ASHRAE Transactions, 88, pp. 973-987, (1982)
[10] Davis G.L., Scott T.C., Component modelling requirements for refrigeration system simulation, Proceedings 1976 Purdue Compressor Technology Conference, pp. 401-408, (1976)

← 1 2 3 4 5 6 →