3-DIMENSIONAL FINITE-ELEMENT ANALYSIS OF THE DOUBLE-TORSION TEST

被引：5

作者：

TSENG, AA

BERRY, JT

机构：

[1] Westinghouse Electric Corporation, Tampa, FL

[2] School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA

来源：

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME | 1979年 / 101卷 / 04期

关键词：

D O I：

10.1115/1.3454641

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A special three-dimensional crack-tip element has been developed to investigate a simple and widely applicable fracture toughness test method. Previous experimental work with the double-torsion method has shown that the use of a relatively thin sectioned specimen may be permitted. The section concerned is considerably thinner than that used in conventional techniques, while the technique also simplifies the determination of the fracture toughness parameter. KK values, which are independent of the crack length, have been obtained for glasses, ceramics, polymers, and a variety of metals and alloys. The numerical solution presented is supportive of many experimental observations made during testing. Excellent correlation between the finite element and experimental results has been obtained. The maximum stress intensity factor is shown to be almost independent of crack length over a considerable range. © 1979 by ASME.

引用

页码：328 / 335

页数：8

共 24 条

[1]

Tracey D.M., Finite Elements for Three-Dimensional Elastic Crack Analysis, Nuclear Engineering and Design, 26, pp. 282-290, (1974)

[2]

Tseng A.A., An Analysis of the Double Torsion Test, (1978)

[3]

Barsoum R.S., On the Use of Isoparametric. Finite Elements in Linear Fracture Mechanics, International Journal for Numerical Methods in Engineering, 10, pp. 26-37, (1976)

[4]

Freese C.E., Tracey D.M., The Natural Isoparametric Triangle versus Collapsed Quadrilaterial for Elastic Crack Analysis, International Journal of Fracture, 12, pp. 767-770, (1976)

[5]

Henshell R.D., Shaw K.G., Crack Tip Finite Elements are Unnecessary, International Journal for Numerical Methods in Engineering, 9, pp. 495-507, (1975)

[6]

Outwater J.C., Gerry D.T., On the Fracture Energy of Glass

[7]

Evans A.G., A Simple Method for Evaluating Slow Crack Growth in Brittle Materials, International Journal of Fracture, 9, 3, pp. 267-275, (1973)

[8]

Murphy M.C., Principles of Fracture Mechanics Applied to the Failure Modes of Fiber Reinforced Composition and to the Fatigue of Selected Brittle Resins and Glass, (1972)

[9]

Outwater J.O., Carnes W.O., Fracture Mechanics of Composite Materials, Proceedings of the U. S. Army, Yielid Mechanics Symposium, (1908)

[10]

Murphy M.C., Kumble R.G., Berry J.T., Outwater J.O., Fracture Toughness Determination in Cast Metals, American Foundrymen’s Society Transactions, 81, pp. 158-162, (1973)

← 1 2 3 →