UPDATE ON HIGH-SPEED MILLING DYNAMICS

被引：75

作者：

SMITH, S

TLUSTY, J

机构：

来源：

JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME | 1990年 / 112卷 / 02期

关键词：

D O I：

10.1115/1.2899557

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

As spindle speeds and power have increased, the possibility of using the stability lobe phenomena to substantially increase the metal removal rate has become more attractive, and selection of optimum spindle speeds has become an important consideration. It is shown that, for many milling operations, it is desirable to set the tooth frequency equal to the natural frequency. At this spindle speed, the development of resonant forced vibration is actually inhibited by regeneration ofwaviness. An algorithm is presented for automatically selecting the optimum spindle speed based on the cutting force signal. © 1990 by ASME.

引用

页码：142 / 149

页数：8

共 10 条

[1]

Tlusty J., Zaton W., Ismail F., Stability Lobes in Milling, CIRP Annals, 32, 1, (1987)

[2]

Tlusty J., Smith S., Forced Vibration, Chatter, and Accuracy in High-Speed Milling, (1985)

[3]

Tlusty J., Smith S., Hernandez I., Tarng Y., Unmanned Machining, High-Speed Milling, Manufacturing Processes and Machine Systems, (1986)

[4]

Smith S., Chatter, Forced Vibrations, and Accuracy in High-Speed Milling, (1986)

[5]

Tobias S., Fishwick W., Theory of Regenerative Machine Tool Chatter, The Engineer, 205, (1958)

[6]

Week M., Verhaag E., Gather M., Adaptive Control for Face-Milling Operations with Strategies for Avoiding Chatter-Vibrations and for Automatic Cut Distribution, CIRP Annals, 24, 1, (1975)

[7]

Gather M., Adaptive Grenzregelung Fiir Das Stirnfrasen, (1976)

[8]

Ulsoy A., Koren Y., Rasmussen F., Principal Developments in the Adaptive Control of Machine Tools, (1982)

[9]

Takata S., Et al., A Sound Monitoring System for Fault Detection of Machines and Machining States, CIRP Annals, 35, 1, (1986)

[10]

Smith S., Automatic Selection of the Optimum Spindle Speed in Highspeed Milling, (1987)

← 1 →