CAD-DESIGN, STRESS-ANALYSIS AND INVITRO EVALUATION OF 3 LEAFLET BLOOD-PUMP VALVES

被引：24

作者：

KNIERBEIN, B ^{[1
]}

ROSARIUS, N ^{[1
]}

UNGER, A ^{[1
]}

REUL, H ^{[1
]}

RAU, G ^{[1
]}

机构：

[1] RHEIN WESTFAL TH AACHEN,HELMHOLTZ INST BIOMED ENGN,PAUWELSSTR 30,W-5100 AACHEN,GERMANY

来源：

JOURNAL OF BIOMEDICAL ENGINEERING | 1992年 / 14卷 / 04期

关键词：

CAD SYSTEM; BLOOD-PUMP VALVE; VALVE LEAFLET; DIP MOLDING;

D O I：

10.1016/0141-5425(92)90001-2

中图分类号：

R318 [生物医学工程];

学科分类号：

0831 ;

摘要：

The computer-supported development of valves for cardiac-assist devices or artificial hearts is shown in relation to plastic technology. A CAD-system is used for the design development, whereas the dimensioning of the critical and highly stressed membranes is examined by FEM-analyses. Economic manufacture is permitted by the combined thermoforming-dip moulding technique; the blood-side components are made from biocompatible polyurethane to minimize blood damage. The first long-term results in the test set- up are compared to the FEM results.

引用

页码：275 / 286

页数：12

共 27 条

[1]

ADAMCZAK H, 1976, THESIS TU AACHEN

[2]

CHEN JF, 1987, 9TH IEEE ANN C BOST

[3]

CHRISTIE GW, 1982, FINITE ELEMENTS BIOM, P153

[4]

Gould P. L., 1973, Computers and Structures, V3, P377, DOI 10.1016/0045-7949(73)90024-2

[5] INVITRO FATIGUE TEST-RESULTS AND HEMOLYSIS OF A FLEXIBLE LEAFLET VALVE [J].

HAUSSINGER, G ;

REUL, H .

BIOMEDIZINISCHE TECHNIK, 1981, 26 (03) :40-43

[6]

HENNIG E, 1984, POLYURETHANES BIOMED, P109

[7]

HEROLD M, 1988, THESIS TU AACHEN

[8]

KNIERBEIN B, 1990, THESIS TU AACHEN

[9]

KNIERBEIN B, 1990, GERMAN PLASTICS, V12, P1385

[10]

KNIERBEIN B, IN PRESS INT J ART O

← 1 2 3 →