EFFECTS OF MICROWAVE PROCESSING ON FIBER-MATRIX ADHESION .2. ENHANCED CHEMICAL BONDING EPOXY TO CARBON-FIBERS

The effect of microwave processing on the chemical interactions occurring between the carbon fiber surface and the epoxy matrix constituents was investigated using X-ray Photoelectron Spectroscopy (XPS). Monofunctional model compounds selected to duplicate the matrix constituents were exposed to the carbon fibers at temperatures similar to those encountered during composite processing. After solvent extraction, chemisorbed species were quantified by XPS. Differences were apparent in the C 1s and O Is core electron regions of the microwave treated samples when referenced to the same elemental regions of thermally (convection) treated samples. Specifically, the atomic percentage of oxygen (in the form of carbon oxides) was increased to a greater degree when using the microwave treatment as opposed to the thermal treatments. The microwave treatment resulted in a substantial increase in the amount of chemical interaction between the fiber surface and the epoxy resin and amine components of the matrix. An epoxy resin/amine hardener adduct compound was also used to investigate the possible interaction of the adduct hydroxyl group with the carbon fiber surface. XPS results indicate a low to insignificant interaction of the hydroxyl with the carbon fiber surface under the conditions used in this study. © 1990, Taylor & Francis Group, LLC. All rights reserved.