RAPIDLY QUENCHED INTERMETALLIC COMPOUNDS, TIAL AND AL3TI

被引：10

作者：

HANAMURA, T

SUGAI, T

TANINO, M

机构：

[1] R and D Laboratories 1, Nippon Steel Corporation, Kawasaki, 211, Nakahara-ku

来源：

JOURNAL OF MATERIALS SCIENCE | 1990年 / 25卷 / 07期

关键词：

D O I：

10.1007/BF00587688

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Two types of molten intermetallic compounds, with stoichiometric compositions TiAl and Al3Ti, are rapidly solidified at a cooling rate ranging from 104 to 105 Ksec-1 using a melt-spinning method. Solidified specimens are analysed by X-ray diffractometry and observed by a high-voltage electron microscope and an analytical transmission electron microscope. Extra phases other than stoichiometric composition phases were not detected for either TiAl or Al3Ti specimens by X-ray diffractometry. Both specimens have very small grains from 1 to 3 μm in diameter. TEM observation reveals that very fine precipitates (100 to 300 nm), which are not detected by X-ray diffractometry, are present within grains. They are Ti3Al in the TiAl specimens, and aluminium in the Al3Ti specimens, respectively. Electron micrographs of the Al3Ti specimens show the presence of pair dislocations (super dislocations) and anti-phase boundaries. They are believed to have been formed at high temperature. © 1990 Chapman and Hall Ltd.

引用

页码：3286 / 3290

页数：5

共 4 条

[1]

[Anonymous], 1958, CONSTITUTION BINARY

[2] POSITIVE TEMPERATURE-DEPENDENCE OF THE YIELD STRESS IN TIAL L10 TYPE SUPERLATTICE INTERMETALLIC COMPOUND SINGLE-CRYSTALS AT 293-1273-K [J].

KAWABATA, T ;

KANAI, T ;

IZUMI, O .

ACTA METALLURGICA, 1985, 33 (07) :1355-1366

[3] DEFORMATION AND FRACTURE OF TIAL AT ELEVATED-TEMPERATURES [J].

LIPSITT, HA ;

SHECHTMAN, D ;

SCHAFRIK, RE .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1975, 6 (11) :1991-1996

[4] PLASTIC-DEFORMATION OF THE INTERMETALLIC COMPOUND AL3TI [J].

YAMAGUCHI, M ;

UMAKOSHI, Y ;

YAMANE, T .

PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 1987, 55 (03) :301-315

← 1 →