COMPOSITES WITH PLANAR REINFORCEMENTS (FLAKES, RIBBONS) - REVIEW

Unlike fibers, planar reinforcements, such as flakes and ribbons, provide reinforcement in two directions. If such reinforcements are arranged parallel to their principal plane in a composite material, they thus provide a distinctly higher performance than fiber reinforcements for two‐dimensional loading conditions. This higher performance amounts to about a factor three for the Young's modulus and a factor two for the tensile strength. However, in spite of this obvious advantage, composites with planar reinforcements are as yet relatively unknown. This is mainly due to the fact that planar reinforcements are not as readily available as fiber reinforcements and therefore not much work has been done on them. The present article gives first a short outline of the theory of the elastic and tensile properties of composites with planar reinforcements. Then, a non‐exhaustive review is presented of the work on composites with planar reinforcements, with particular attention given to recent developments. A final aim of this article is that by showing the merits of planar reinforcements as compared to presently existing fiber reinforcements, it may contribute to their use in the design of composite structures. Copyright © 1979 Society of Plastics Engineers, Inc.