Particle effects on friction and wear of aluminium matrix composites

被引：111

作者：

Zhang, ZF ^{[1
]}

Zhang, LC ^{[1
]}

Mai, YW ^{[1
]}

机构：

[1] UNIV SYDNEY,CTR ADV MAT TECHNOL,DEPT MECH & MECHATRON ENGN,SYDNEY,NSW 2006,AUSTRALIA

来源：

JOURNAL OF MATERIALS SCIENCE | 1995年 / 30卷 / 23期

关键词：

D O I：

10.1007/BF01151519

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Particle effects on friction and wear of 6061 aluminium (6061 Al) reinforced with silicon carbide (SiC) and alumina (Al2O3) particles were investigated by means of Vickers microhardness measurements and scratch tests. Unreinforced 6061 Al matrix alloy was also studied for comparison. To explore the effect of heat treatment, materials subjected to three different heat treatment conditions, i.e, under-aged, over-aged and T6, were used. Multiple-scratch tests using a diamond and a steel indentor were also carried out to simulate real abrasive wear processes. Vickers microhardness measurements indicated that T6 heat-treated composites had the highest hardness. Single-scratch tests showed that the variation of friction coefficient was similar to that of Vickers hardness and the peak-aged composites exhibited the best wear resistance. The wear rate of fine particle-reinforced composites was mainly affected by hardness. However, the wear rate of large particle-reinforced composites was influenced by both the hardness and fracture of the particles.

引用

页码：5999 / 6004

页数：6

共 18 条

[1]

ALPAS AT, 1985, WEAR MAT, P784

[2] CONTACT AND RUBBING OF FLAT SURFACES [J].

ARCHARD, JF .

JOURNAL OF APPLIED PHYSICS, 1953, 24 (08) :981-988

[3] NATURAL AGING CHARACTERISTICS OF ALUMINUM-ALLOY 6061 REINFORCED WITH SIC WHISKERS AND PARTICLES [J].

BADINI, C ;

MARINO, F ;

TOMASI, A .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 136 :99-107

[4] SOME OBSERVATIONS ON SCRATCH AND INDENTATION HARDNESS MEASUREMENTS [J].

BROOKES, CA ;

HARRISON, PH ;

GREEN, P ;

MOXLEY, B .

JOURNAL OF PHYSICS D-APPLIED PHYSICS, 1972, 5 (07) :1284-&

[5]

JOHNSON KL, 1994, 4TH P INT TRIB C AUS, V1, P53

[6]

KOPALINSKY EM, 1994, 4TH P INT TRIB C AUS, V1, P33

[7] MODEL FOR WEAR OF BRITTLE SOLIDS UNDER FIXED ABRASIVE CONDITIONS [J].

LAWN, BR .

WEAR, 1975, 33 (02) :369-372

[8]

LEE HL, 1992, WEAR, V159, P223, DOI 10.1016/0043-1648(92)90305-R

[9] EFFECT OF AGING ON ABRASION RATE IN AN AL-ZN-MG-SIC COMPOSITE [J].

LIN, SJ ;

LIU, KS .

WEAR, 1988, 121 (01) :1-14

[10] ABRASIVE WEAR OF DISCONTINUOUS SIC REINFORCED ALUMINUM-ALLOY COMPOSITES [J].

MA, ZY ;

BI, J ;

LU, YX ;

SHEN, HW ;

GAO, YX .

WEAR, 1991, 148 (02) :287-293

← 1 2 →