MASS-TRANSFER MODELING FOR VIRGINIA TOBACCO CURING

被引：21

作者：

KIRANOUDIS, CT

MAROULIS, ZB

MARINOSKOURIS, D

机构：

[1] National Technical University, Department of Chemical Engineering, Athens, Zografou Campus

来源：

DRYING TECHNOLOGY | 1990年 / 8卷 / 02期

关键词：

and phrases; driving forces; drying; sorption isotherms;

D O I：

10.1080/07373939008959888

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Four mathematical models, describing the moisture transfer during Virginia tobacco curing under varying air-temperature and humidity were tested using experimental data from an industrial dryer. The model, based on the assumption that the major resistance to moisture transfer is at the air boundary layer and that the driving force is the water activity difference, was found to be the most accurate. The appropriate mass transfer coefficient was determined. An empirical equation, predicting the equilibrium moisture content of Virginia tobacco as a function of temperature and water activity of the surrounding air, was proposed and experimentally tested. © 1990, Taylor & Francis Group, LLC. All rights reserved.

引用

页码：351 / 366

页数：16

共 7 条

[1]

Beck J.V., Arnold K.J., Parameter Estimation in Engineering and Science. John Wiley.

[2]

Bridges T.C., Walton L.R., Ross I.J., A Deep-Layer Drying Model for Burley Tobacco Curing, Transactions of the ASAE., 24, 6, pp. 1608-1612, (1981)

[3]

Crump J.C., The modeling of Water Sorption in Tobacco and Cellulose, Transactions of the ASAE., 25, 1, pp. 250-256, (1982)

[4]

Fortes M., Okos M.R., Drying Theories: Their bases and limitations as applied to foods and grains, Advances in Drying, 1, (1980)

[5]

Janjai S., Guevezov V., Daguenet M., Technico-Economlcal Feasibility of Solar-Assisted Virginia Tobacco Curing, Drying Technology, 4, 4, pp. 605-632, (1986)

[6]

Maroulls Z.B., Tsarni E., Marinos-Kouris D., Saravacos G.D., Application of the GAB Model to the Moisture Sorption Isotherms for Dried Fruits, Journal of Food Engineering, 7, 1, pp. 63-78, (1988)

[7]

Ono T., Yoshida T., Designing of Dryer in Tobacco Manufacturing Process. Drying 1986, Hemisphere Publishing Corporation, (1986)

← 1 →