EVALUATION OF CIRCULARITY TOLERANCE USING MONTE-CARLO SIMULATION FOR COORDINATE MEASURING MACHINE

被引：21

作者：

CHANG, H

LIN, TW

机构：

[1] Wayne State University, Detroit, MI, 48202

来源：

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH | 1993年 / 31卷 / 09期

关键词：

Machine tools;

D O I：

10.1080/00207549308956845

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Coordinate measuring machines are used to gather data points from a specific object. A mass of geometric boundary data points has to be collected in order to estimate desired geometric parameters of part features. This paper presents a Monte Carlo modelling, simulation, and heuristic results of the minimum sufficient data set to determine the accuracy of the circularity (roundness) tolerance measurement. An image processing procedure is incorporated in the research to approximate the true envelope of the circular feature from a two-dimensional image scan. The minimum sufficient data set is determined by a Monte Carlo simulation procedure based on relative errors of the calculated circular profiles. Results are presented to establish the criterion of selecting sampling data points, and to study the probabilistic nature of the measurement procedures.

引用

页码：2079 / 2086

页数：8

共 10 条

[1]

Elmaraghy W.H., Elmaraghy H., Wu A.Z., Determination of actual geometric deviations using coordinate measuring machine data, ASME Manufacturing Review, 3, 1, pp. 32-39, (1990)

[2]

Elzinga J., Hearn D.W., Geometrical solutions for some minimax location problems, Transportation Science, 6, 4, pp. 379-394, (1971)

[3]

Etesami F., Tolerance verification through manufactured part modelling, Journal of Manufacturing Systems, 7, 3, pp. 223-232, (1988)

[4]

Etesami F., Qiao H., Analysis of two-dimensional measurement data for automated inspection, Journal of Manufacturing Systems, 9, 1, pp. 21-34, (1990)

[5]

Imai H., Iri M., Computational geometric methods for polygonal application of a curve, Computer Vision, Graphics, and Image Processing, 36, pp. 31-41, (1986)

[6]

Lu J., Lin T.W., Adaptive pattern recognition for binary images, OS a Technical Digest, 17, (1991)

[7]

Murthy T., Abdin S.Z., Minimum zone evaluation of surfaces, International Journal of Machine Tool Design and Research, 20, pp. 123-136, (1980)

[8]

Requicha A., Chan S.C., Representation of geometric features, tolerances and attributes in solid modelers based on constructive geometry, IEEE Journal of Robotics and Automation, 2, 3, pp. 156-166, (1986)

[9]

Shunmugam M.S., On assessment of geometric errors, International Journal of Production Research, 24, 2, pp. 413-425, (1986)

[10]

Weckenmann A., Heinrichowski M., Problem with software for running coordinate measuring machines, Precision Engineering, 7, 2, pp. 87-91, (1985)

← 1 →