RAPIDLY SINTERED PARTICULATE CERAMIC MATRIX COMPOSITES

被引：7

作者：

BENGISU, M

INAL, OT

机构：

[1] Materials and Metallurgical Engineering Department, New Mexico Institute of Mining and Technology, Socorro

来源：

CERAMICS INTERNATIONAL | 1991年 / 17卷 / 03期

关键词：

D O I：

10.1016/0272-8842(91)90066-9

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The effect of rapid rate furnace sintering and HCD-plasma sintering on density, microstructure, and mechanical properties of three Al2O3-5% vol. metal carbide composites and Al2O3-10% vol. ZrO2 was studied and the results are compared to conventionally sintered composites. Significantly higher densities were achieved in Al2O3-5% vol. SiC composites by plasma sintering as well as rapid rate furnace sintering, which also improved the attendant mechanical properties. High fractional densities and similar mechanical properties were obtained in Al2O3-5% vol. TiC and Al2O3-10% vol. ZrO2 composities produced both through rapid rate and conventional sintering. The finest microstructure in particulate-CMCs was achieved by plasma sintering.

引用

页码：187 / 198

页数：12

共 22 条

[1]

Borom, Lee, Adv. Ceram. Mater., 1, 4, pp. 335-340, (1986)

[2]

Lee, Borom, Adv. Ceram. Mater., 3, 1, pp. 38-44, (1988)

[3]

Tian, Johnson, Brodwin, Ceramic Transactions, Ceramic Powder Science II, 1, pp. 933-938, (1988)

[4]

Upadhya, Am. Ceram. Soc. Bull., 67, 10, pp. 1691-1694, (1988)

[5]

Cordone, Martinsen, Glow-Discharge Apparatus for Rapid Sintering of Al2O3, Journal of the American Ceramic Society, 55, 7, (1972)

[6]

Wahi, Ilschner, J. Mater. Sci., 15, 4, pp. 875-885, (1980)

[7]

Niihara, Nakahira, Uchiyama, Hirai, Fracture Mechanics of Ceramics, Composites, Impact, Statistics, and High-Temperature Phenomena, 7, pp. 103-106, (1986)

[8]

Becher, Tennery, Fracture Mechanics of Ceramics, Measurements, Transformations, and High Temperature Fracture, 6, pp. 383-399, (1983)

[9]

Wang, Stevens, J. Mater. Sci., 24, 10, pp. 3421-3440, (1989)

[10]

Kim, Lee, J. Am. Ceram. Soc., 72, 8, pp. 1333-1337, (1989)

← 1 2 3 →