Water and paraffinic oils were used to determine variables that affect positive displacement pumps used to meter liquid flow in an air-assist spray system. Components needed to construct an air-assist spray system were described for use in spray chambers and on a tractor for field application of herbicides in ultralow volume (ULV). The flow rate of the pump varied less than 2% for the water and oil as the pump setting was varied from 0 to 100% of the pump's capacity. Linear relationships were shown for both liquids as the voltage input varied from 4 to 13 volts. Air pressures to 100 kPa and liquid temperatures to 35 C did not affect flow rate of the pump. Volume median diameter of the spray droplets decreased from 295-mu-m to 77-mu-m and 159-mu-m to 85-mu-m for water and paraffinic oil, respectively, as the air pressure was adjusted from 14 to 110 kPa.