IDENTIFICATION OF BEARING COEFFICIENTS BY INCOMPLETE MODE SHAPES

被引：4

作者：

KIM, SI

KWAK, BM

LEE, HS

机构：

[1] Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Seoul

[2] Machine Tool Research Laboratory, Korea Institute of Machinery and Metals, Changwon, Kyungsangnam-Do

来源：

MECHANICAL SYSTEMS AND SIGNAL PROCESSING | 1990年 / 4卷 / 05期

关键词：

D O I：

10.1016/0888-3270(90)90068-V

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A new method to identify the moment and radial stiffness and damping coefficients of isotropic bearings in a spindle-bearing system with incomplete mode shapes is proposed. A complete relationship between the bearing reactions and the incomplete mode shapes is constructed in the form of a system of linear equations by using the transfer matrix method based on Timoshenko beam theory including the internal damping of beam material. In essence, the bearing coefficients are straightforwardly identified without any iteration from the system of linear equations. But, where inaccuracies of measured data produce unreasonable bearing coefficients, the linearisation method is used to solve a constrained minimisation problem to attain reasonable bearing coefficients. An experiment on a spindle-bearing test model reveals the usefulness of the proposed method. © 1990.

引用

页码：425 / 433

页数：9

共 13 条

[1]

Yoshimura, Okushima, Measurement of dynamic rigidity and damping property for simplified joint models and simulation by computers, Annals of the CIRP, 25, pp. 193-198, (1977)

[2]

Inamura, Sata, Stiffness and damping identification of the elements of a machine-tool structure, Annals of the CIRP, 28, pp. 235-239, (1979)

[3]

Tlusty, Ismail, Dynamic structural identification tasks and methods, Annals of the CIRP, 29, pp. 251-255, (1980)

[4]

Yuan, Wu, Identification of the joint structural parameters of machine tool by DDS and FEM, ASME Transactions, Journal of Engineering for Industry, 107, pp. 64-69, (1985)

[5]

Tsutsumi, Chung, Murakami, Ito, Dynamic behaviours of a machine tool spindle system, Transactions of the Japan Society of Mechanical Engineers Series C, 51, pp. 417-424, (1985)

[6]

Pestel, Leckie, Matrix Methods in Elastomechanics, pp. 130-152, (1963)

[7]

Snowdon, Vibration and Shock in Damped Mechanical Systems, pp. 333-365, (1968)

[8]

Bertsekas, Constrained Optimization and Lagrange Multiplier Methods, pp. 179-297, (1982)

[9]

Cowper, The shear coefficients in Timoshenko's beam theory, Journal of Applied Mechanics, 33, pp. 335-340, (1966)

[10]

Otnes, Enochson, Applied Time Series Analysis, 1, pp. 106-276, (1978)

← 1 2 →