DETERMINATION OF OXYGEN IN IRON-ALUMINUM ALLOY BY INERT-GAS FUSION-INFRARED ABSORPTIOMETRY (REPRINTED FROM J JAPAN INST METALS, VOL 55, PG 975, 1991)

被引：57

作者：

INOUE, R

SUITO, H

机构：

[1] Research Institute of Mineral Dressing and Metallurgy, Tohoku University

来源：

MATERIALS TRANSACTIONS JIM | 1991年 / 32卷 / 12期

关键词：

OXYGEN ANALYSIS; INERT GAS FUSION-INFRARED ABSORPTIOMETRY; ALUMINUM ALLOY; GETTERING; ALUMINA; NICKEL CAPSULE; TIN BATH;

D O I：

10.2320/matertrans1989.32.1164

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The method for the determination of oxygen in iron containing aluminum was studied by use of the inert gas fusion-infrared absorptiometry as a function of flux, temperature and heating pattern. The double graphite crucibles containing Sn in excess of four times as much as the sample weight were first degassed at 3000 K, and the temperature was lowered to 2630 approximately 2760 K. Then the sample enclosed by nickel capsule was dropped into the tin bath and fused for 30 s. This analytical procedure made the oxygen determination in an Fe-10 approximately 15 mass%Al alloy possible without observation of "gettering effect" due to aluminum. The value for oxygen recovery was confirmed to be almost 100% by the analysis of alumina powder. The results for the oxygen in a Ti-25 approximately 51 mass%Al alloy was also discussed.

引用

页码：1164 / 1169

页数：6

共 19 条

[1] DETERMINATION OF OXYGEN BY INERT GAS DIFFUSION METHOD USING GRAPHITE CAPSULES [J].

BECK, EJ ;

CLARK, FE .

ANALYTICAL CHEMISTRY, 1961, 33 (12) :1767-&

[2]

BIRKS N, 1966, J IRON STEEL I, V204, P340

[3] THE GASEOUS SPECIES OF THE AL-AL2O3 SYSTEM [J].

BREWER, L ;

SEARCY, AW .

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 1951, 73 (11) :5308-5314

[4]

ELLIOTT JF, 1960, THERMOCHEMISTRY STEE, V2

[5]

Furuya K., 1965, BUNSEKI KAGAKU, V14, P708

[6]

GOKCEN NA, 1953, T AM I MIN MET ENG, V197, P173

[7]

GOWARD GW, 1965, ANAL CHEM, V37, pR111

[8]

Koizumi T., 1964, TETSU-TO-HAGANE, V50, P787, DOI [10.2355/tetsutohagane1955.50.5_787, DOI 10.2355/TETSUTOHAGANE1955.50.5_787]

[9]

KRAFT G, 1970, ERZMETALL, V23, P365

[10]

Kubaschewski O., 1979, METALLURGICAL THERMO

← 1 2 →