OPTIMIZATION OF CUTTING CONDITIONS FOR MULTIPASS TURNING OPERATIONS USING SEQUENTIAL QUADRATIC-PROGRAMMING

被引：10

作者：

CHUA, MS

LOH, HT

WONG, YS

RAHMAN, M

机构：

[1] Department of Mechanical and Production Engineering, National University of Singapore, Singapore, 0511

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 1991年 / 28卷 / 1-2期

关键词：

Multipass Turning - Optimization Computer Program - Sequential Quadratic Programming;

D O I：

10.1016/0924-0136(91)90224-3

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The optimization of multipass turning operations has been an important research topic as optimum cutting conditions are to be determined for both process planning and NC part programming with an objective to minimize either the total production time or the total production cost per component. This paper presents the numerical optimization of minimizing total production time per component for multipass turning operations subject to practical constraints such as force, power, machining speed and feed using sequential quadratic programming technique. Some numerical results of this optimization problem are presented.

引用

页码：253 / 262

页数：10

共 13 条

[1]

Gilbert, Economics of Machining, Machining Theory and Practice, pp. 465-485, (1950)

[2]

Armarego, Brown, The Machining of Metals, pp. 254-291, (1969)

[3]

Kals, Hijink, A Computer Aid in the Optimization of Turning Conditions in Multi-Cut Operations, Annals of the CIRP, 27, 1, pp. 465-469, (1978)

[4]

Ermer, Pradhan, Economic Selection of Cutting Conditions for Constrained Single- or Multi-pass Operation, Proceedings of NAMRC-VII, pp. 355-361, (1979)

[5]

Ermer, Kromodihardjo, Optimization of Multipass Turning with Constraints, Transactions of the ASME, 103, pp. 462-468, (1981)

[6]

Yellowley, A Fundamental Examination of the Economics of the Two-pass Turning operation, International Journal of Production Research, 21, 5, pp. 617-626, (1983)

[7]

Chia, Optimization Analysis and Strategies for the Selection of Cutting Conditions for Turning Operations, PhD thesis, (1985)

[8]

Hinduja, Petty, Tester, Barrow, Calculation of Optimum Cutting Conditions for Turning Operations, Proc. Instn Mech Engrs, 199, 2 B, pp. 81-92, (1985)

[9]

Abuelnaga, Computer Optimization of Metal Cutting Processes, The Proceedings of the International Conference on Optimization Techniques and Applications, pp. 754-762, (1987)

[10]

Yellowley, Gunn, The Optimal Subdivision of Cut in Multi-pass Machining Operations, International Journal of Production Research, 27, 9, pp. 1573-1588, (1989)

← 1 2 →