SIMULATION OF FEED CYCLES FOR GRINDING BETWEEN CENTERS

被引：16

作者：

CHEN, X

ALLANSON, D

THOMAS, A

MORUZZI, JL

ROWE, WB

机构：

[1] School of Engineering and Technology Management, Liverpool John Moores University, Liverpool

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 1994年 / 34卷 / 05期

关键词：

D O I：

10.1016/0890-6955(94)90045-0

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In order to grind workpieces accurately and effficiently, it is necessary to determine appropriate values of feed rate, target position and dwell time. The selection of optimum values depends on the deflection behaviour of the machine-workpiece system as represented by the system time constant. This paper describes the modelling and the simulation of feed cycles based on a standard simulation package. Simulated grinding cycles are compared with results from experimental measurements. The simulation technique has been employed to reduce the volume of experimentation required to develop and test feed cycles and control strategies. The paper highlights the advantages of simulation in developing a grinding process control strategy.

引用

页码：603 / 616

页数：14

共 16 条

[1]

Kelly, Rowe, Moruzzi, Adaptive grinding control, Adv. Mfg Engng, 1, pp. 287-295, (1989)

[2]

Rowe, Moruzzi, Allanson, Kelly, Terry, Centreless Grinding Research and its Application in Advanced Manufacturing Technology, CIRP Annals - Manufacturing Technology, 38, pp. 311-314, (1989)

[3]

Kaliszer, Adaptive control in grinding processes, Proc. 4th Int. Conf. Prod. Engng, pp. 579-593, (1980)

[4]

Trmal, In-process control of size of a ground component, Proc. 20th MTDR Conf., pp. 405-411, (1979)

[5]

Webster, Zhao, Time-optimum adaptive control of plunge grinding, Int. J. Mach. Tools Manufact., 30, pp. 413-421, (1990)

[6]

Hahn, Controlled-Force Grinding—A New Technique for Precision Internal Grinding, Journal of Engineering for Industry, 86, pp. 287-293, (1964)

[7]

Malkin, Koren, Optimal infeed control for accelerated spark-out in plunge grinding, Trans. ASME, J. Engng Ind., 106, pp. 70-74, (1984)

[8]

Elmqvist, Astrom, Schonthal, Wittenmark, Simnon User's Guide for MS-DOS Computers, (1990)

[9]

Malkin, Grinding Technology, Theory and Applications of Machining with Abrasives, (1989)

[10]

Amitay, Malkin, Koren, Adaptive control optimization of grinding, Trans. ASME, J. Engng Ind., 103, pp. 103-108, (1981)

← 1 2 →