ROBOT CALIBRATION - METHOD AND RESULTS

被引：35

作者：

DUELEN, G

SCHROER, K

机构：

[1] Fraunhofer Institute for Production Systems and Design Technology (IPK), Berlin

来源：

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING | 1991年 / 8卷 / 04期

关键词：

D O I：

10.1016/0736-5845(91)90034-P

中图分类号：

TP39 [计算机的应用];

学科分类号：

081203 ; 0835 ;

摘要：

For many applications, robots are needed which have an absolute Cartesian pose accuracy of the same order of magnitude as their repeatability. Calibration procedures must be applied to reach this aim. In this paper, a calibration procedure is presented which allows the automatic determination of all kinematic parameters, gear parameters, and static elasticity effects. With the aid of these results it is possible to increase pose accuracy up to the robot's system limit as determined by its repeatability. Moreover, information can be acquired which suggests improvements in robot design, thereby also improving repeatability.

引用

页码：223 / 231

页数：9

共 20 条

[1]

Ahmad, Second order nonlinear kinematic effects, and their compensation, Proc. 2nd. IEEE Int. Conf. on Robots and Automation, pp. 307-314, (1985)

[2]

Dennis, Schnabel, Numerical Methods for Unconsidered Optimization, (1983)

[3]

Everett, Suryohadiprojo, A study of kinematic models for forward calibration of manipulators, Proc. of the 1988 IEEE Int. Conf. on Robotics and Automation, pp. 798-800, (1988)

[4]

Hayati, Mirmirani, Improving the absolute positioning accuracy of robot manipulators, J. Robotic Systems, 2, 4, pp. 397-413, (1985)

[5]

Hsu, Everett, Identification of the kinematic parameters of a robot manipulator for positional accuracy improvement, Proc. of the Computers in Engineering Conference, pp. 263-267, (1985)

[6]

Ishii, Sakane, Kakikura, Mikami, A new calibration system for improving absolute positioning accuracy of robot manipulators, Proc. of the 16th Int. Symposium on Industrial Robot, pp. 1017-1025, (1986)

[7]

Judd, Knasinski, A technique to calibrate industrial robots with experimental verification, Proc. IEEE Int. Conf. on Robotics and Automation, pp. 351-357, (1987)

[8]

Khalil, Gautier, Identification of geometric parameters of robots, Symposium on Robot Control'85 (1st IFAC Symposium), pp. 91-104, (1985)

[9]

Kirchhoff, Held, Schroer, Automatisierte Kalibrierung von Industrieroboten, Komponenten für forgetschrittene Roboter und Handhabungssysteme, pp. 204-219, (1988)

[10]

Kirchner, Gurumoorthy, Prinz, A peturbation approach to robot calibration, The International Journal of Robotics Research, 6, pp. 47-59, (1987)

← 1 2 →