DETERMINATION OF SB, NI AND V IN SLURRY FROM AIRBORNE PARTICULATE MATERIAL COLLECTED ON FILTER BY GRAPHITE-FURNACE ATOMIC-ABSORPTION SPECTROMETRY

A microdigestion procedure performed directly in the autosampler cup is proposed. Small quartz filter pieces loaded with the particulate material are transferred to the cup. The sample is digested by a mixture of nitric, sulfuric and hydrofluoric acid (1:1:1) under sonication. After the addition of a boric acid solution the elements are determined by graphite furnace atomic absorption spectrometry using the autosampler to deliver the slurry into the furnace. A mixture of palladium and magnesium nitrates was used as a modifier for Sb. Spiking studies showed recoveries close to 100% using aqueous analytical curves for Ni and Sb. For V, an analytical curve in the blank slurry, obtained by submitting an unloaded filter to the same procedure, was used. The method was applied to two standard reference materials, Coal Fly Ash (NIST 1633a) and Urban Particulate (NIST 1648) and the concentrations showed good agreement with the certified or recommended values using aqueous analytical solutions.