ENHANCED TRIBOLOGICAL PERFORMANCE OF RIGID DISK BY USING CHEMICALLY BONDED LUBRICANT

被引：22

作者：

LEE, HJ ^{[1
]}

ZUBECK, R ^{[1
]}

HOLLARS, D ^{[1
]}

LEE, JK ^{[1
]}

CHAO, A ^{[1
]}

SMALLEN, M ^{[1
]}

机构：

[1] CONNER PERIPHERALS,SAN JOSE,CA 95134

来源：

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS | 1993年 / 11卷 / 03期

关键词：

D O I：

10.1116/1.578796

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Nonreactive perfluoropolyether lubricants were processed by ultraviolet (UV) radiation to make them chemically bonded to thin film magnetic disks. The tribological performance of these disks was then investigated. Disks with a range of 30-50 angstrom thick perfluoropolyether lubricant, were treated by using the different sources of UV radiations in air, argon, and nitrogen atmospheres. By changing the power density from 40 mW/cm2 to 50 W/cm2 and UV wavelength 185 to 365 nm, in either dry nitrogen or argon gas, a maximum of 38 angstrom of lubricant was chemically bonded to the thin film disks. Stiction and friction forces during 1 rpm testing were dramatically decreased with the increase in UV exposure time. Contact-start-stop test performance of disks with approximately 15%-30% of chemically bonded lubricant was also significantly enhanced. An optimum amount of chemically bonded lubricant provides excellent tribological performance for thin film disks.

引用

页码：711 / 714

页数：4

共 8 条

[1] DUPLEX REACTIVE FLUOROCARBON FILMS WITH SPIN-OFF RESISTANT CHARACTERISTICS [J].