SOL-GEL PROCESSING OF ORIENTED SRTIO3 THIN-FILMS

Sol-gel processing was employed to fabricate multilayered SrTiO3 thin films onto fused silica, Si (100) and SrTiO3 (110) substrates. A Sr-Ti alkoxide precursor solution, chemically modified with diisopropanolamine, was hydrolyzed and spin-coated onto these substrates. These films were annealed at 300 degrees C and then heated to 650 degrees C for 1 h in air, which resulted in the formation of phase pure crystalline SrTiO3. X-ray diffraction analysis indicated that partially oriented films were deposited onto fused silica and Si (100), while highly oriented film was formed on SrTiO3 (110). A typical microstructure of the film deposited on SrTiO3 (110) and heated at 650 degrees C for 1 h showed the presence of submicrometer grains on the order of 0.05 to 0.1 mu m. The thickness of a single coating measured from the cross section of the SEM micrograph was about 0.1 to 0.2 mu m.