In low grade, biotite-rich metasiltstones and slates from the western side of Fleurieu Peninsula, the slaty cleavage is defined by elongate deformed old biotites and by the coincident elongate dimensions and (001) planes of thin, well aligned new biotites. Histograms of frequency versus (001)-S1 angle (S1 defined by aligned thin muscovite used as the reference plane) were determined in thin section for both populations. The old biotites show a symmetrical bimodal distribution of (001) about S1, with maxima at around 20° either side ofS1. This distribution, together with the preserved intracrystalline strain, indicates that these old grains deformed largely by slip on (001) with some modification of grain boundaries by diffusive transfer. The new biotite grains are very well aligned (standard deviation 3.8°) and show no sign of mechanical deformation. They have not been mechanically rotated into alignment but must have nucleated and grown in a specific orientation. The proportion of new to old grains increases with metamorphic grade, causing a rapid strengthening of the crystallographic alignment. In slates and phyllites with similar microstructure, the mica fabric determined by X-ray texture goniometry cannot be used as a quantitative measure of the geometry and magnitude of the bulk strain, as the intensity of the crystallographic fabric will be strongly influenced by the proportion of new mica, which is itself greatly affected by the metamorphic grade during slaty cleavage formation. © 1979.
