THE TORQUE TRANSMISSION CAPABILITIES OF THE ADHESIVELY-BONDED TUBULAR SINGLE LAP JOINT AND THE DOUBLE LAP JOINT

被引：32

作者：

CHOI, JH

LEE, DG

机构：

[1] Department of Precision Engineering and Mechatronics, School of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Yusong-gu, Taejon, 305-701

来源：

JOURNAL OF ADHESION | 1994年 / 44卷 / 03期

关键词：

ADHESION; STEEL ADHERNEDS; SINGLE LAP JOINT; DOUBLE LAP JOINT; FINITE ELEMENT METHOD; FATIGUE; EPOXY ADHESIVE; MECHANICAL PROPERTIES; STATIC AND DYNAMIC TORSION; JOINT ECCENTRICITY;

D O I：

10.1080/00218469408027077

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

With the wide application of fiber-reinforced composite materials in aircraft, space structures and robot arms, the design and manufacture of composite joints have become a very important research area because they are often the weakest areas in composite structures. In this paper, the stress and torque transmission capabilities of the adhesively-bonded tubular single lap joint and the double lap joint were experimentally tested. In order to compare the experimental results with the calculated results, the stress and torque transmission capabilities were analyzed by the 3-dimensional finite element method taking into consideration the nonlinear properties of the adhesive. From the experiments it was found that the torque transmission capabilities of the adhesively-bonded double lap joint was 2.7 times as large as that of the single lap joint. Also, it was found that the fatigue limit of the double lap joint was 16 times as large as that of the single lap joint.

引用

页码：197 / 212

页数：16

共 12 条

[1] STRESS ANALYSIS OF ADHESIVE BONDED TUBULAR LAP JOINTS [J].

ADAMS, RD ;

PEPPIATT, NA .

JOURNAL OF ADHESION, 1977, 9 (01) :1-18

[2] VISCOELASTIC ANALYSIS OF AN ADHESIVE TUBULAR JOINT [J].

ALWAR, RS ;

NAGARAJA, YR .

JOURNAL OF ADHESION, 1976, 8 (01) :79-92

[3] ANALYSIS OF TUBULAR LAP JOINT IN TORSION [J].

CHON, CT .

JOURNAL OF COMPOSITE MATERIALS, 1982, 16 (JUL) :268-284

[4]

CRANDALL SH, 1978, INTRO MECHANICS SOLI, pCH5

[5] ANALYSIS OF A BONDED JOINT IN A COMPOSITE TUBE SUBJECTED TO TORSION [J].

GRAVES, SR ;

ADAMS, DF .

JOURNAL OF COMPOSITE MATERIALS, 1981, 15 (MAY) :211-224

[6] ANALYSIS AND OPTIMIZATION OF A TUBULAR LAP JOINT SUBJECTED TO TORSION [J].

HIPOL, PJ .

JOURNAL OF COMPOSITE MATERIALS, 1984, 18 (04) :298-311

[7]

KUTSCHA D, 1969, AFMLTR68391

[8] AN EXPERIMENTAL-STUDY OF FATIGUE-STRENGTH FOR ADHESIVELY BONDED TUBULAR SINGLE LAP JOINTS [J].

LEE, DG ;

KIM, KS ;

IM, YT .

JOURNAL OF ADHESION, 1991, 35 (01) :39-53

[9] DEVELOPMENT OF A FAILURE MODEL FOR THE ADHESIVELY BONDED TUBULAR SINGLE LAP JOINT [J].

LEE, SJ ;

LEE, DG .

JOURNAL OF ADHESION, 1992, 40 (01) :1-14

[10]

REINHART TJ, 1987, COMPOSITES, P479

← 1 2 →