感应耦合电能传输系统不同补偿拓扑的研究

被引:87
作者
周雯琪
马皓
何湘宁
机构
[1] 浙江大学电气工程学院
关键词
感应耦合电能传输(ICPT); 补偿拓扑; 功率因数; 谐振;
D O I
10.19595/j.cnki.1000-6753.tces.2009.01.023
中图分类号
TM46 [变流器];
学科分类号
摘要
比较了感应耦合电能传输(ICPT)系统的拓扑。讨论了ICPT系统中几种不同的补偿形式,包括单谐振补偿和多谐振补偿拓扑,并推导出匝比为1时每种拓扑的电压电流增益。为了最小化器件的电压电流应力和优化参数设计,介绍了谐振电路功率因数的概念。由分析结果及得到的曲线图可知,在单谐振补偿拓扑中,一次侧串联补偿与其余几种相比更能抵消漏感的影响。而几种多谐振补偿拓扑的效果则明显优于单谐振补偿拓扑。分析和比较了不同参数变化时的特性曲线,以便于进行电路设计。最后以一次、二次侧都进行并联补偿的一种电流型ICPT电路为例进行实验验证,以说明实际系统的性能。
引用
收藏
页码:133 / 139
页数:7
相关论文
共 16 条
  • [11] A contactless electrical energy transmission system for portable telephone battery chargers. Yungtaek Jang,Jovanovic′M M. IEEE Transactions on Industrial Electronics . 2003
  • [12] Design of transcutaneous energytransmission system using a series resonant converter. Ali Ghahary,Bo H Cho. IEEE Transactions on Power Electronics . 1992
  • [13] A contactless electrical energy transmission system. Don A G,Pedder A,Brown D. IEEE Transactions on Industrial Electronics . 1999
  • [14] Design and implementation of low-profile contactless battery charger using planar printed circuit board windings as energy Transfer device. Byungcho Choi,Jaehyun Nho,Honnyong Cha,Taeyoung Ahn,and Seungwon Choi. IEEE Transactions on Industrial Electronics . 2004
  • [15] Design of a contactless battery charger for cellular phone. Kim C G,Seo D H,You J S,et al. IEEE Transactions on Industrial Electronics . 2001
  • [16] An improved three-level LCC converter with a novel control strategy for high-frequency high-power-density capacitor charging power supplies. Fu D,Qiu Y,Lu B,et al. Proceedings of IEEE APEC2006 . 2006