DCCHP排烟余热耦合空气源热泵系统性能分析

被引:3
作者
谭永生
机构
[1] 中国水利电力物资集团有限公司
关键词
能源利用; 空气源热泵; 排烟余热; 一次能源利用率;
D O I
暂无
中图分类号
TM61 [各种发电]; TU83 [空气调节、采暖、通风及其设备];
学科分类号
080802 [电力系统及其自动化]; 081404 [供热、供燃气、通风及空调工程];
摘要
内燃机冷热电联供系统作为一种高效的能源利用方式,排烟余热回收后的排放温度在100℃左右,仍有部分低温余热没有充分利用,提出一种分布式冷热电三联供(distributedcombinedcoolingheatingandpower,DCCHP)动力排烟低温余热耦合空气源热泵系统,实现了排烟余热的深度回收。以10 kW内燃机冷热电联供为基础,研究了该系统可回收余热量、热泵循环性能系数(coefficient of performance,COP)以及对一次能源利用率的影响。结果表明:在设计工况下,DCCHP系统排烟余热1.22 kW,热泵系统回收余热量可达1.07 kW,排烟余热回收率达到87.7%;热泵COP高达4.66,提高39.5%;系统一次能源利用率提高3.9%;同时解决了寒冷地区冬季热泵机组蒸发器结霜、低温环境下运行性能差的问题。此研究为冷热电联供系统与热泵机组的联合高效应用提供了重要的参考。
引用
收藏
页码:526 / 532
页数:7
相关论文
共 10 条
[1]
一种新型跨临界CO2冷电联供系统热力分析 [J].
夏文凯 ;
高毅超 ;
霍耀武 ;
戴义平 .
发电技术, 2018, 39 (04) :328-335
[2]
回收循环水余热的热泵供热系统热力性能分析 [J].
张学镭 ;
陈海平 .
中国电机工程学报, 2013, 33 (08) :1-8+15
[3]
Organic Rankine cycle design and performance comparison based on experimental database.[J].Arnaud Landelle;Nicolas Tauveron;Philippe Haberschill;Rémi Revellin;Stéphane Colasson.Applied Energy.2017,
[4]
Parametric modelling of domestic air-source heat pumps.[J].C.P. Underwood;M. Royapoor;B. Sturm.Energy & Buildings.2017,
[5]
Experimental Study of Frost Growth Characteristics on Surface of Fin-tube Heat Exchanger.[J].Xue Liping;Guo Xianmin;Xing Zhen.Energy Procedia.2017,
[6]
Performance Analysis of CCHP System for University Campus in North China.[J].Jinming Jiang;Weijun Gao;Yanna Gao;Xindong Wei;Soichiro Kuroki.Procedia - Social and Behavioral Sciences.2016,
[7]
Energy and environmental issues in desalination.[J].Sydney Miller;Hilla Shemer;Raphael Semiat.Desalination.2015,
[8]
A survey of district heating systems in the heating regions of northern China.[J].Xin Xu;Shijun You;Xuejing Zheng;Han Li.Energy.2014,
[9]
Thermodynamic performance assessment of CCHP system driven by different composition gas.[J].Penghui Gao;Wangliang Li;Yongpan Cheng;YenWah Tong;Yanjun Dai;Ruzhu Wang.Applied Energy.2014,
[10]
A new heat recovery technique for air-conditioning/heat-pump system.[J].Guangcai Gong;Wei Zeng;Liping Wang;Chih Wu.Applied Thermal Engineering.2008, 17