Mechanisms and kinetics of thermal decomposition of plastics from isothermal and dynamic measurements

The kinetics of decomposition of plastics are of interest from different points of view, i.e. evolution of harmful substances during fires or waste incineration, recovering of chemical raw materials from plastic refuses and designing of recycling procedures. To measure the formal kinetic parameters of the degradation of polymers isothermal and dynamic methods are applied in this work. Dynamic measurements are performed by combined thermogravimetry mass spectrometry (TG-MS), the isothermal measurements are carried out with a new closed loop-type reactor. To evaluate consistent kinetic data from isothermal and dynamic measurements, the energy balance for the sample in dynamic measurements has to be considered to obtain the true sample temperature and heating rate. Subject of this investigation is the exploitation of dynamic and isothermal methods for measuring and interpreting the kinetics of thermal decomposition of plastics. Results for commodity plastics polyethylene and poly(vinyl chloride) (PVC) are presented. The combined application of TG-RIS, isothermal experiments in the closed loop-type reactor and DSC leads to new results for the decomposition kinetics of PVC. The dehydrochlorination mechanism at moderate temperature can be distinguished in an endothermal and exothermal part. The benzene formation is identified as a second order reaction. A great advantage of the isothermal method is, that changes in the mechanisms are detectable, i.e. changes in the apparent order of the reaction and the apparent activation energy. From that, new mechanistic aspects of the decomposition kinetics of polyethylene were obtained. (C) 1999 Elsevier Science B.V. All rights reserved.