学术探索
学术期刊
新闻热点
数据分析
智能评审

Characterization of (Tix Cr0.6-x)N0.4 coatings and their tribological behaviors against an epoxy molding compound

被引：20
作者：
Hsieh, JH
Zhang, WH
Li, C
Sun, CQ
机构：
[1] Nanyang Technol Univ, Sch MPE, Singapore 639798, Singapore
[2] Gint Inst Mfg Technol, Proc Technol Div, Singapore 638075, Singapore
[3] Nanyang Technol Univ, Sch EEE, Singapore 639798, Singapore
来源：
SURFACE & COATINGS TECHNOLOGY | 2001年 / 146卷
关键词：
epoxy molding compound; Ti-Cr-N coating; unbalanced magnetron sputtering;
D O I：
10.1016/S0257-8972(01)01401-3
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Five graded (Ti-x Cr0.6-x)N-0.4 coatings were deposited by unbalanced magnetron sputtering. These coatings were first characterized using XRD, TMA, glow discharge spectroscopy and Raman, to understand their basic properties and oxidation resistance. The focus was then on the comparison of wear resistance among these coatings against epoxy molding compounds. The results show that the properties and wear resistance of the ternary coatings depend strongly on the composition ratio of Ti and Cr. Cromium remarkably enhances TiN coating's oxidation resistance and therefore, wear resistance against molding compound, All of the Ti-Cr-N ternary coating exhibit better wear performance against EMC than TiN coating. (C) 2001 Elsevier Science BN. All rights reserved.
引用
收藏
页码：331 / 337
页数：7
相关论文
共 9 条
[1]   PREPARATION AND PERFORMANCE OF (CR,TI)N COATINGS DEPOSITED BY A COMBINED HOLLOW-CATHODE AND CATHODIC ARC TECHNIQUE [J].
EBERSBACH, G ;
FABIAN, D ;
WUTTKE, W ;
JEHN, HA .
SURFACE & COATINGS TECHNOLOGY, 1993, 59 (1-3) :160-165
[2]   OXIDATION BEHAVIOR OF CHROMIUM-BASED NITRIDE COATINGS [J].
HUBER, E ;
HOFMANN, S .
SURFACE & COATINGS TECHNOLOGY, 1994, 68 :64-69
[3]   CORROSION BEHAVIOR IN ACID-SOLUTION OF (TI, CR)N-X FILMS DEPOSITED ON GLASS [J].
MASSIANI, Y ;
GRAVIER, P ;
FEDRIZZI, L ;
MARCHETTI, F .
THIN SOLID FILMS, 1995, 261 (1-2) :202-208
[4]   DEPOSITION OF GRADED ALLOY NITRIDE FILMS BY CLOSED FIELD UNBALANCED MAGNETRON SPUTTERING [J].
MONAGHAN, DP ;
TEER, DG ;
LAING, KC ;
EFEOGLU, I ;
ARNELL, RD .
SURFACE & COATINGS TECHNOLOGY, 1993, 59 (1-3) :21-25
[5]   High temperature oxidation behaviour of (Ti1-xCrx)N coatings [J].
Otani, Y ;
Hofmann, S .
THIN SOLID FILMS, 1996, 287 (1-2) :188-192
[6]   (TICR)N COATINGS DEPOSITED BY CATHODIC VACUUM ARE EVAPORATION [J].
VETTER, J ;
SCHOLL, HJ ;
KNOTEK, O .
SURFACE & COATINGS TECHNOLOGY, 1995, 74-5 (1-3) :286-291
[7]   Development of graded Cr-Ti-N coatings [J].
Zeng, XT ;
Zhang, S ;
Hsieh, J .
SURFACE & COATINGS TECHNOLOGY, 1998, 102 (1-2) :108-112
[8]   Tribological behavior of TiN and CrN coatings sliding against an epoxy molding compound [J].
Zhang, WH ;
Hsieh, JH .
SURFACE & COATINGS TECHNOLOGY, 2000, 130 (2-3) :240-247
[9]  
[No title captured]
1