Properties and microstructure of zein sheets plasticized with palmitic and stearic acids

Interest in biodegradable materials for packaging and agricultural uses has grown in recent years. Plant proteins have been proposed as inexpensive, renewable, and abundant feedstock. Corn zein was investigated based on value-added considerations and on the unique thermoplastic and hydrophobic properties of zein. Films prepared from zein are known to be tough and resistant, but also hard and brittle, thus requiring the addition of plasticizers to improve flexibility. The objectives of this research were to study the tensile properties, water absorption, and microstructure of zein sheets plasticized with palmitic and stearic acids. Both palmitic and stearic acids showed similar effects as plasticizers of zein. Tensile strength of zein sheets increased with the addition of low levels of plasticizers. However, beyond a critical point, tensile strength decreased with further addition of fatty acids. Water absorption decreased continuously with increasing fatty acid content. Kinetic parameters indicated fatty acids decreased water absorption by decreasing the saturation level of zein sheets. Coating zein with flax oil decreased the rate of water absorption by sealing off surface pores. Scanning electron micrographs of zein sheets showed the development of layered structures as fatty acid content increased. Zein-fatty acid layers were believed to be responsible for the increased tensile strength of plasticized zein sheets and to have contributed to increased resistance to water absorption.